LevelOne Wireless Broadband Router User Guide
Options
This screen allows advanced users to enter or change a number of settings. For normal opera- tion, there is no need to use this screen or change any settings.
An example Options screen is shown below.
Figure 45: Options Screen
Data - Options Screen
Backup DNS
| IP Address | Enter the IP Address of the DNS (Domain Name Servers) here. These |
|
|
| DNS will be used only if the primary DNS is unavailable. |
|
|
|
|
|
| TFTP |
|
|
| Enable Firm- | • If enabled, TFTP (Trivial FTP) can be used to upgrade the firm- |
|
| ware in this device. This is normally not required; a Windows |
| |
| ware Upgrade |
| |
| utility is available for this purpose. |
| |
| using TFTP |
| |
| • You must obtain the firmware upgrade file first; instructions for |
| |
|
|
| |
|
| using TFTP will be available with the upgrade. |
|
|
|
|
|
| UPnP |
|
|
| Enable UPnP | • UPnP (Universal Plug and Play) allows automatic discovery and |
|
| configuration of equipment attached to your LAN. UPnP is by |
| |
| Services |
| |
| supported by Windows ME, XP, or later. |
| |
|
|
| |
|
| • If Enabled, this device will be visible via UPnP. |
|
|
| • If Disabled, this device will not be visible via UPnP. |
|
|
|
|
|
| Allow Configu- | • If checked, then UPnP users can change the configuration. |
|
| • If Disabled, UPnP users can only view the configuration. But |
| |
| ration... |
| |
|
| currently, this restriction only applies to users running Windows |
|
|
| XP, who access the Properties via UPnP. (e.g. Right - click the |
|
|
| LevelOne Wireless Broadband Router in My Network Places, and |
|
|
| select Properties) |
|
|
|
|
|
82