LevelOne Wireless Broadband Router User Guide
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the LevelOne Wireless Broadband Router 's Access Point, regardless of the operating system which is used on the client.
To use the Wireless Access Point in the LevelOne Wireless Broadband Router, each Wireless Station must have compatible settings, as follows:
Mode | The mode must be set to Infrastructure. |
|
|
SSID (ESSID) | This must match the value used on the LevelOne Wireless Broadband |
| Router. The default value is default |
| Note! The SSID is case sensitive. |
|
|
WEP | By default, WEP on the LevelOne Wireless Broadband Router is dis- |
| abled. |
| • If WEP remains disabled on the LevelOne Wireless Broadband |
| Router, all stations must have WEP disabled. |
| • If WEP is enabled on the LevelOne Wireless Broadband Router, |
| each station must use the same settings as the LevelOne Wireless |
| Broadband Router. |
|
|
46