LevelOne Wireless Broadband Router User Guide
Connection Status - PPPoE
If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed when the "Connection Details" button is clicked.
Figure 29: PPPoE Status Screen
Data - PPPoE Status Screen
Connection
Physical Address | The hardware address of this device, as seen by remote devices on |
| the Internet. (This is different to the hardware address seen by |
| devices on the local LAN.) |
|
|
IP Address | The IP Address of this device, as seen by Internet users. This |
| address is allocated by your ISP (Internet Service Provider). |
|
|
Network Mask | The Network Mask associated with the IP Address above. |
|
|
PPPoE Link Status | This indicates whether or not the connection is currently estab- |
| lished. |
| • If the connection does not exist, the "Connect" button can be |
| used to establish a connection. |
| • If the connection currently exists, the "Disconnect" button |
| can be used to break the connection. |
|
|
Connection Log |
|
Connection Log | • The Connection Log shows status messages relating to the |
| existing connection. |
50