MX240 Ethernet Services Router Hardware Guide
Figure 40: Installing the Fan Tray in an MX240 Router
Replacing the Air Filter
The router has one air filter that installs vertically in the rear of the chassis. The air filter is
The air filter is located in the rear of the chassis on the left side. The air filter weighs approximately 1 lb (0.5 kg).
To replace an air filter, use the following procedure:
■Removing an Air Filter on page 94
■Installing the Air Filter on page 95
Removing an Air Filter
CAUTION: Do not run the router for more than a few minutes without the air filter in place.
CAUTION: Always keep the air filter in place while the router is operating, except during replacement. Because the fans are very powerful, they could pull small bits of wire or other materials into the router through the unfiltered air intake. This could damage the router components.
94■ Replacing Cooling System Components