Appendix A: Safety and Regulatory Compliance Information
General Electrical Safety Guidelines and Warnings
■Install the router in compliance with the following local, national, or international electrical codes:
■United
■
■Other
■Evaluated to the TN power system.
■Locate the emergency
■Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
■Never assume that power is disconnected from a circuit. Always check the circuit before starting to work.
■Carefully look for possible hazards in your work area, such as moist floors, ungrounded power extension cords, and missing safety grounds.
■Operate the router within marked electrical ratings and product usage instructions.
■For the router and peripheral equipment to function safely and correctly, use the cables and connectors specified for the attached peripheral equipment, and make certain they are in good condition.
Many router components can be removed and replaced without powering off or disconnecting power to the router, as detailed in
Grounded Equipment Warning
WARNING: The router is intended to be grounded. Ensure that the router is connected to earth ground during normal use.
Waarschuwing Deze apparatuur hoort geaard te worden Zorg dat de
Varoitus Tämä laitteisto on tarkoitettu maadoitettavaksi. Varmista, että isäntälaite on yhdistetty maahan normaalikäytön aikana.
Attention Cet équipement doit être relié à la terre. S'assurer que l'appareil hôte est relié à la terre lors de l'utilisation normale.
Warnung Dieses Gerät muß geerdet werden. Stellen Sie sicher, daß das
Safety Guidelines and Warnings ■ 145