GarrettCom manual 6KPMV Cards into a Magnum 6K8-Series Securely latching up

Magnum 6K8-Series Industrial Field Switch Installation and User Guide 03/06)

Step 5. Once the latching connectors are aligned properly and the mounting holes are aligned with stand offs then press slowly and firmly with two fingers (as shown

below in Fig. 3.6.2f) on the top of the latching connectors until the connectors latched up securely.

Figure 3.6.2f:

6KPMV Cards into a Magnum 6K8-Series

Securely latching up

J5

DSSV Step 6. Now screw down the daughter board with 6 #440 screws, so that it holds the daughter board securely. The figure on the left shows the top view of successfully installed 6KPMV cards inside and the Power Led(pin J5) and Power supply cable(pin DSSV) connected to the board pins as shown in Fig 3.6.2g with arrows.

Fig. 3.6.2g Top View: 6KPM Module installed and insight for connecting two wires to the right pins

Step 7. Once the installation of granddaughter and daughter modules is done, the front panel screen plates of 6KPMV need to be placed

on the face of the module securely and carefully. Now screw down properly the

www . GarrettCom . com

36