Magnum 6K8-Series Industrial Field Switch | Installation and User Guide 03/06) |
feature eliminates the need for a special twisted pair crossover cable when connecting to a hub or another switch.
Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, a FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off), and a “10/100” LED indicating 100Mb when lit (or 10 Mbps when off).
Important Note: The 10/100 RJ-45 ports are supported with Auto-negotiation and Auto-crossover (MDIX), which allow the RJ-45 ports to automatically Link with any RJ- 45 device and eliminate the use of cross-over cable.
5.2.106KP8-45-2MT, 6@ 10/100Mbps RJ-45 and 2@100Mb multi-mode FX , MTRJ Small-Form-Factor
The Magnum 6KP8- | | 6KP86KP8V-45-2MT- | | |
45-2MT eight port Module is a | 6 Port@10/10Mbps | & 2 port @100Mb | |
combo module with copper and | Multi-Mode Fiber port | | |
| | 2 | | | |
fiber (Small Form Factor) | | 1 | 3 | 5 | | 1 |
MTRJ type ports. The small | | 10/10 | | | L | |
4 | | | | | |
sizes of MTRJ connectors give | F/H | | | AC | |
| | | F/H | |
| 10/100 | | | |
| | | | | ACT | |
an advantage of placing more | | | | | ACT | 3 |
| F/H 2 | 4 | LK | F/H |
| | 6 | |
fiber ports on one module. The | 1 | LINK | | 2 | 10/100 | |
6KP8-45-2MT is equipped with | | |
| | | 4 | | |
six 10/100 RJ-45 ports and two | 3 | ACTIVITY | FULL/HALF | |
100Mb MTRJ fiber ports. When installed in a Magnum 6K8-Series Switch, it supports the standard distances as mentioned on 5.2.3. and the LEDs also act similarly.
5.2.10a 6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode FX , LC Small-Form-Factor
The Magnum 6KP8-45SLC eight port Module is a combo module with copper and fiber (Small Form Factor) LC type fiber ports.
www . GarrettCom . com