GarrettCom 6K8 manual GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector

Magnum 6K8-Series Industrial Field Switch Installation and User Guide 03/06)

The small sizes of LC connectors provide an advantage of placing more ports on one module. The 6KP8-45-2SLC is equipped with 6 10/100 RJ-45 ports and 2 Single- mode fiber ports.

When installed in a Magnum 6K8- Series Switch, it supports the standard distances as mentioned on

5.2.4.and the LEDs also act similarly.

6KP8-45-2SLC 6KP8V-

6 Port@ 10/100Mbps & 2 port @ 100Mbps

Single-Mode Fiber port (LC) 2

	1	3	5			1
10/10					L
4					AC
F/H
10/100					ACT
					F/H
					ACT
F/H	2	4	LK	6	F/H	3

1	LINK	2	10/100
3	ACTIVITY	4	FULL/HALF

5.2.11GBIC-SXSC Gigabit fiber(1000Mb), multi-mode SC Connector

The Magnum GBIC-SXSC is a multi-mode Gigabit fiber connector

equipped with SC type connectors and can be easily snapped in and out. The Gigabit fiber ports are most popular as server-to-switch and switch-to-switch applications. It supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 550m at full duplex.

ACT

F/

TX LK RX

1 3

10/100

F/

5 7

L

ACT

1@ 1000Mb Fiber SC + 4@10/ 100Mb

The GBIC transceiver has been offered in the modular slot with multiple options as per the user requirement. The two Giga port has been offered as GBPM-2OTX (fiber or RJ- 45), whereas the single Gigabit module comes in two different flavor of G+2 (100Mb fiber ports) or G+4(10/100 RJ-45 ports) as shown in the above figure.

The GBIC transceiver is fastened using snap-in clips. Insert the transceiver (take care to insert it the right way up, arrows on top) until it clicks in space. While removing the transceiver, press the clips on either side of the transceiver at the same time and pull the transceiver out.

Each port has an Activity (ACT) LED indicating packets being received and a Link (LK) LED indicating proper connectivity with the remote device when lit.

www . GarrettCom . com

54