GE GEK-106465A instruction manual Technical Specifications

Page 12

PRODUCT DESCRIPTION

2.4.TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

	2.4.1.	INPUTS
Activation range:	Programmable from 1 up to 255 Vdc in steps of 1 V
Impedance	> 100 kOhm
Load for voltage supervision inputs	2 mA + V/100 kOhm
Acknowledgement time	<1 m
Debounce time:	1 to 50 ms in steps of 1 ms

		2.4.2.	OUTPUTS
Permanent current	16	A
Closing current	60	A during 1 second
Opening current	0.3 A with L/R = 40 ms at 125 Vdc
	0.25 A with L/R = 40 ms at 250 Vdc

		2.4.3.	CONTROL POWER SUPPLY
LO (low range)
Range:	24 to 48 Vdc (from 24 Vdc – 15% to 48 Vdc + 20%)
HI (high range)
Range:	110 to 250	Vdc (from 110 Vdc – 15% to 250 Vdc + 20%)
	110 to 240	Vac (from 110 Vac – 15% to 240 Vac + 20%)
Consumption:	5 W typical
	0.25 W more per each activated output.
Interruptions:	Typical 100 ms, without unit reset.

	2.4.4.	CAN BUS
Baudrate:	125 kbits per second
Media:	Glass fiber optic multimode with ST connectors.
	Maximum recommended length 1Km
	3 wire cable connection
	Maximum recommended length 500m

	2.4.5.	ENVIRONMENTAL CHARACTERISTICS
Operation temperature:	- 10°C to + 60°C
Storage temperature:	- 40°C to + 80°C
Humidity:	95% without condensing.

GEK-106465A

CIO Remote CAN Digital I/O Module

11

Image 12

Contents CIO Table of Contents INPUT/OUTPUT Modules Description Circuit Continuity Supervision InputsImportant Procedures CIO Front ViewInspection Checklist Identification Label A4454P5EUROPE, Middle East and Africa GE Multilin AMERICA, Asia and Australia GE MultilinSafety Instructions Overview Introduction to F650 and F600 Family of RelaysHardware Architecture Software ArchitectureCommunications Architecture Summary of Features Product DescriptionOrdering Code CIO DescriptionTechnical Specifications Packaging and Weight Type TestsCategory Standard Class Test ApprovalsPower supply Input/Output module Module DescriptionMechanical Description MountingRear Panel Mounting Rear Cover Description Wiring External ConnectionsWiring Diagram for Model CIOH1J1 226B5113F2 Boards Board OptionMixed Termina Inputs Supervision OutputsOperand Description SUPCOIL2Without Supervision With Current Supervision with SEAL-IN With Simple Voltage Supervision Internal State Circuit Output Breaker Operand StatusHardware Hardware With Double Voltage Supervision 52/a 52/b Status of Involved Elements Inputs to F650Operand Contact INPUT0015 SUPCOIL2 Front Indicators SoftwareUser Interfaces Circuit Supervision and Contact SEAL-IN Circuits Circuit SupervisionContact SEAL-IN Control Settings for INPUTS/OUTPUTS INPUT/OUTPUT Boards SettingsGeneral Board Settings Settings relative to Inputs Input LogicSettings relative to Outputs Output LogicInput activation signals Contact Inputs INPUTS/OUTPUTS StatusInput Status Mixed Board Supervision Board Board F, G, H, J TypeContact Outputs activation signals Contact Output Activation Signals Contact Output OperatesContact Output Status Board F, G, H, JContact Output Reset Signals Contact Output Resets Contact Output ResetsIO Board Status Board StatusGeneral Considerations on the Power Supply Network Visual InspectionIndicators Power Suply TestingIsolation Tests Source OptionSettings/Control Elements/Inputs Outputs/Board Communication with the Master UnitInputs and Outputs Digital InputsContact Outputs Circuit Continuity Supervision InputsCoil Latching Circuits