
USER INTERFACES
4. USER INTERFACES
4.1.SOFTWARE
CIO units need to be connected to a master unit, either an F650 or an F600. If the master unit is an F650, the CIO can be programmed using EnerVista F650Setup program; in case of using an F600 as master unit, the CIO can be programmed using
EnerVista F650Setup software provides a simple way to configure, monitor and maintain operation of F650 and the connected CIO unit. Please refer to the F650 user manual for a more detailed reference about EnerVista F650Setup.
In the same way, please refer to
4.2.FRONT INDICATORS
CIO units incorporate 2 LEDs on the front, one of them indicates that the unit is powered, and the other indicates activity on the CAN bus.
CIO Remote CAN Digital I/O Module | 29 |