Foundry Networks LS 624 manual C Hecking C Onnectivity, M Aintaining The F Ast I Ron Ls H Ardware

Page 4
CHAPTER 4

Foundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide

POWER PRECAUTIONS

3-4

PREPARING THE INSTALLATION SITE

3-5

CABLING INFRASTRUCTURE

3-5

INSTALLATION LOCATION

3-5

INSTALLING THE DEVICE

3-5

DESKTOP INSTALLATION

3-6

RACK MOUNT INSTALLATION

3-6

WALL MOUNT INSTALLATION

3-7

INSTALLING A REDUNDANT POWER SUPPLY

3-8

ABOUT THE RPS2-EIF REDUNDANT POWER SUPPLY

3-8

INSTALLING A FASTIRON LS REDUNDANT POWER SUPPLY

3-10

EQUIPMENT CHECKLIST

3-10

MOUNTING

3-10

CONNECTING SWITCHES TO THE RPS

3-12

PORTS PIN-OUT(RPS2-EIF)

3-14

INSTALLING AN OPTIONAL MODULE INTO THE SWITCH

3-14

INSTALLING AN SFP TRANSCEIVER

3-15

POWERING ON THE SYSTEM

3-16

VERIFYING PROPER OPERATION

3-16

ATTACHING A PC OR TERMINAL

3-16

WIRING MAP FOR SERIAL CABLE

3-17

CHAPTER 4

 

CONNECTING NETWORK DEVICES AND

 

CHECKING CONNECTIVITY

4-1

ASSIGNING PERMANENT PASSWORDS

4-1

RECOVERING FROM A LOST PASSWORD

4-2

CONFIGURING IP ADDRESSES

4-3

DEVICES RUNNING LAYER 2 SOFTWARE

4-3

CONNECTING NETWORK DEVICES

4-4

CONNECTORS

4-4

CABLE SPECIFICATIONS

4-4

CONNECTING TO ETHERNET OR FAST ETHERNET HUBS

4-4

CONNECTING TO WORKSTATIONS, SERVERS, OR ROUTERS

4-5

CONNECTING A NETWORK DEVICE TO A FIBER PORT

4-5

TESTING CONNECTIVITY

4-6

OBSERVING LEDS

4-6

TROUBLESHOOTING NETWORK CONNECTIONS

4-7

CHAPTER 5

 

MAINTAINING THE FASTIRON LS HARDWARE

5-1

MANAGING FASTIRON LS TEMPERATURE SETTINGS

5-1

DISPLAYING MANAGEMENT MODULE CPU USAGE

5-4

HARDWARE MAINTENANCE SCHEDULE

5-4

INSTALLING OR REPLACING A 10-GIGABITETHERNET MODULE

5-4

iv

© 2007 Foundry Networks, Inc.

September 2007

Image 4
Contents Foundry FastIron LS Layer 2 Compact Switch Hardware Installation GuideFastIron LS FastIron LS FGS ReleaseCopyright 2007 Foundry Networks, Inc. All rights reserved INSTALLING A FASTIRON LS SWITCH ABOUT THIS GUIDEPRODUCT OVERVIEW CHAPTERC HECKING C ONNECTIVITY M AINTAINING THE F AST I RON LS H ARDWAREC HAPTER C ONNECTING N ETWORK D EVICES ANDHARDWARE SPECIFICATIONS APPENDIX AREGULATORY STATEMENTS C AUTIONS AND W ARNINGS A PPENDIX BC AUTIONS W ARNINGSChapter About This Guide IntroductionWhat’s Included in This Edition? AudienceHow to Get Help Warranty CoverageWeb Access Email AccessHardware Features Chapter Product OverviewFLS624, FLS648 Table 2.1 Chapter ContentsControl Features Reset ButtonSerial Management Interface Console Port FastIron LS Network InterfacesNetwork Interfaces FastIron LS 10/100/1000BASE-T PortsTable 2.2 Network Interfaces Interface10 Gigabit Ethernet Module Slots Cable Specifications for New Module10 Gbps CX4 Ports 10-GbE CX4 ModulePort, System and Module Status LEDs CX4 Transceiver Infiniband cableTable 2.3 Port Status LEDs ConditionTable 2.4 Status LEDs System LEDsPower Supplies Optional Redundant Power SupplyPower Supply Receptacles Fiber Optic Modules2007 Foundry Networks, Inc Unpacking a System Chapter Installing a FastIron LS SwitchTable 3.1 Chapter Contents Package Contents General RequirementsSummary of Installation Tasks Table 3.2 Summary of Installation TasksWhere to Find More Information Foundry FastIron Configuration GuideInstallation Precautions General PrecautionsLifting Precautions Power PrecautionsPreparing the Installation Site Installation LocationInstalling the Device Cabling InfrastructureRack Mount Installation Desktop InstallationFigure 3.1 Attaching the adhesive feet Figure 3.3 Installing the device in a rack Wall Mount InstallationFigure 3.2 Attaching the brackets Installing a Redundant Power Supply About the RPS2-EIF Redundant Power SupplyFeatures and Benefits Package ContentsLEDs Port IndicatorsSystem Indicators FastIron RPS2-EIFInstalling a FastIron LS Redundant Power Supply Equipment ChecklistInstallation MountingFigure 3.6 Installing the RPS in a Rack Desktop or Shelf MountingFigure 3.5 Attaching the brackets Connecting Switches to the RPS FastIron LS648FLS units Installing an Optional Module into the Switch Ports Pin-Out RPS2-EIFGND N.C RPS Present Status Status Power Good GND GND N.CInstalling an SFP Transceiver Figure 3.10 Inserting an SFP transceiver into a slotVerifying Proper Operation Powering On the SystemAttaching a PC or Terminal Wiring Map for Serial Cable Table 3.3 Serial Cable WiringSwitch’s 9-Pin Null Modem2007 Foundry Networks, Inc Chapter Connecting Network Devices and Checking Connectivity Assigning Permanent PasswordsTable 4.1 Network Connectivity Tasks StepRecovering from a Lost Password FLS648 Switch enableFLS648 Switch# configure terminal FLS648 Switchconfig# FLS648 Switchconfig# enable super-user-password textConfiguring IP Addresses Devices Running Layer 2 SoftwareConnecting Network Devices ConnectorsCable Specifications Connecting to Ethernet or Fast Ethernet HubsConnecting to Workstations, Servers, or Routers Connecting a Network Device to a Fiber PortInstalling a Fiber Optic Module Automatic MDI/MDIX DetectionTesting Connectivity Cleaning the Fiber-Optic ConnectorsObserving LEDs Cabling a Fiber Optic ModuleTroubleshooting Network Connections Table 4.2 Network Connection-Related LED StatesDesired MeaningFoundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide Managing FastIron LS Temperature Settings Using the Temperature Sensor on the FastIron LSChapter Maintaining the FastIron LS Hardware Table 5.1 Chapter ContentsDisplaying the Temperature on the FastIron LS Displaying Syslog Messages for Temperature on the FastIron LSFLS648 Switch show chassis Power supply 1 not present Power supply 2 NA - AC - Regular present, status ok Fan 1 failedFLS648 Switch# show log Hardware Maintenance Schedule Installing or Replacing a 10-Gigabit Ethernet ModuleDisplaying Management Module CPU Usage Changing the Temperature Polling IntervalReplacing a Fiber Optic Module Installing an Optional Module into the SwitchRemoving a 10-Gigabit Ethernet Module Removing a Fiber Optic Module Installing a New Fiber Optic ModuleBail Latch Cabling a Fiber Optic Module Cleaning the Fiber-Optic ConnectorsDigital Optical Monitoring Table 5.2 Status Value Description Supported MediaStatus Value no optical-monitor alarm interval CLI Commandsshow optic port/slotnumber 2007 Foundry Networks, Inc Chapter Troubleshooting Diagnosing Switch IndicatorsTable 0.1 Troubleshooting Chart SymptomInstallation Power and Cooling ProblemsIn-Band Access Chapter Hardware Specifications Table 0.2 Chapter ContentsFastIron LS specifications Redundant Power supply specificationsFastIron LS Specifications Physical DimensionsEnvironmental Considerations Operating EnvironmentCooling Storage EnvironmentMean Time Before Failure Table 0.7 Storage EnvironmentTable 0.9 Fan Noise Levels for FastIron LS 24-Port Switch Table 0.10 Fan Noise Levels for FastIron LS 48-Port SwitchChassis side Fan SpeedRegulatory Compliance FCC CFR 47 Part 15 WarningCISPR 22 CLASS A Warning Table 0.11 Regulatory Compliance and Safety Approvals CertificationsWarranty Pinouts and SignalingVCCI Serial Console Port PinoutsConnector Type LC connector forTable 0.12 Cable length summary table Cable Type1Table 0.12 Cable length summary table Continued Cable TypeAC Power Supply SpecificationsTable 0.13 Specifications for AC Power PropertyRedundant Power Supply Specifications Power CordsKey features Physical Dimensions and WeightInput Connector Electromagnetic Compatibility EMC and Immunity StandardsTable 0.15 Input Connector for Power Supplies Input Connector PropertiesSafety Agency Approvals and Certifications Safety WarningsEnvironmental Considerations Table 0.17 Safety Warning Labels on Power SuppliesElectrical Specifications Input specificationsTable 0.20 Input Specifications for Power Supplies Table 0.19 Mean Time Before Failure Specifiations2007 Foundry Networks, Inc Appendix A Regulatory Statements U.S.AIndustry Canada Statement Europe and Australia2007 Foundry Networks, Inc Appendix B Cautions and Warnings CautionsFoundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide Cautions and Warnings CAUTION Never leave tools inside the device Warnings Page Foundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide