Foundry Networks LS 648 Cable Specifications, 12 Cable length summary table, Cable Type1, Core

Page 61

Table 0.12: Cable length summary table

Hardware Specifications

Figure 0.2 Console Port Pin Assignments Showing Cable Connection Options to a Terminal or PC

DB-9 to DB-9					DB-9 to DB-25
Female Switch			Terminal or PC		Female Switch			Terminal or PC
1		Reserved	1		1		Reserved	8
2			2		2			3
3			3		3			2
4		Reserved	4		4		Reserved	20
5				5	5				7
		Reserved					Reserved
6			6		6			6
7			7		7			4
8			8		8			5
9		Reserved	9		9		Reserved	22

Figure 0.3 Pin assignment and signalling for 10/100BaseTX and 1000BaseT ports

	10BaseT	100BaseTX and 1000BaseT
Pin Assignment	Pin Number MDI-X ports	Pin Number MDI-X ports

8

1

		1	RD+	1	RD+
		2	RD-	2	RD-
	1	3	TD+	3	TD+
		4	Not used	4	CMT
		5	Not used	5	CMT
	8	6	TD-	6	TD-
	8	7	Not used	7	CMT
		7	Not used	7	CMT
		8	Not used	8	CMT

Cable Specifications

Table 0.12 lists the cable specifications for the cables used with the 10/100, Gigabit and 10-Gigabit Ethernet ports.

NOTE: Cable installation and network configuration will affect overall transmission capability. The numbers provided below represent the accepted recommendations of the various standards. For network-specific recommendations, consult your local Foundry reseller or system engineer.

Table 0.12: Cable length summary table

	Cable Type1	Connector Type	Core	Modal	Range (meters)
			Diameter	Bandwidth
			(microns)	(MHz*km) or
				Wavelength
				(nm)

1000Base-BX-D	Single-mode	LC connector for	9	1490 nm	2 – 10000
	Fiber (SMF)	SFP module			(10km)

September 2007

© 2007 Foundry Networks, Inc.

2 - 7

Image 61

Contents Hardware Installation Guide Foundry FastIron LS Layer 2 Compact SwitchFastIron LS FastIron LS FGS ReleaseCopyright 2007 Foundry Networks, Inc. All rights reserved ABOUT THIS GUIDE INSTALLING A FASTIRON LS SWITCHPRODUCT OVERVIEW CHAPTERM AINTAINING THE F AST I RON LS H ARDWARE C HECKING C ONNECTIVITYC HAPTER C ONNECTING N ETWORK D EVICES ANDHARDWARE SPECIFICATIONS APPENDIX AREGULATORY STATEMENTS A PPENDIX B C AUTIONS AND W ARNINGSC AUTIONS W ARNINGSIntroduction Chapter About This GuideWhat’s Included in This Edition? AudienceWarranty Coverage How to Get HelpWeb Access Email AccessChapter Product Overview Hardware FeaturesFLS624, FLS648 Table 2.1 Chapter ContentsReset Button Control FeaturesSerial Management Interface Console Port FastIron LS Network InterfacesFastIron LS 10/100/1000BASE-T Ports Network InterfacesTable 2.2 Network Interfaces InterfaceCable Specifications for New Module 10 Gigabit Ethernet Module Slots10 Gbps CX4 Ports 10-GbE CX4 ModuleCX4 Transceiver Infiniband cable Port, System and Module Status LEDsTable 2.3 Port Status LEDs ConditionSystem LEDs Table 2.4 Status LEDsOptional Redundant Power Supply Power SuppliesPower Supply Receptacles Fiber Optic ModulesSeptember Unpacking a System Chapter Installing a FastIron LS SwitchTable 3.1 Chapter Contents General Requirements Package ContentsTable 3.2 Summary of Installation Tasks Summary of Installation TasksWhere to Find More Information Foundry FastIron Configuration GuideGeneral Precautions Installation PrecautionsLifting Precautions Power PrecautionsInstallation Location Preparing the Installation SiteInstalling the Device Cabling InfrastructureRack Mount Installation Desktop InstallationFigure 3.1 Attaching the adhesive feet Figure 3.3 Installing the device in a rack Wall Mount InstallationFigure 3.2 Attaching the brackets About the RPS2-EIF Redundant Power Supply Installing a Redundant Power SupplyFeatures and Benefits Package ContentsPort Indicators LEDsSystem Indicators FastIron RPS2-EIFEquipment Checklist Installing a FastIron LS Redundant Power SupplyInstallation MountingFigure 3.6 Installing the RPS in a Rack Desktop or Shelf MountingFigure 3.5 Attaching the brackets FastIron LS648 Connecting Switches to the RPSFLS units Ports Pin-Out RPS2-EIF Installing an Optional Module into the SwitchGND N.C RPS Present Status Status Power Good GND GND N.CFigure 3.10 Inserting an SFP transceiver into a slot Installing an SFP TransceiverVerifying Proper Operation Powering On the SystemAttaching a PC or Terminal Table 3.3 Serial Cable Wiring Wiring Map for Serial CableSwitch’s 9-Pin Null ModemSeptember Assigning Permanent Passwords Chapter Connecting Network Devices and Checking ConnectivityTable 4.1 Network Connectivity Tasks StepFLS648 Switch enable Recovering from a Lost PasswordFLS648 Switch# configure terminal FLS648 Switchconfig# FLS648 Switchconfig# enable super-user-password textDevices Running Layer 2 Software Configuring IP AddressesConnectors Connecting Network DevicesCable Specifications Connecting to Ethernet or Fast Ethernet HubsConnecting a Network Device to a Fiber Port Connecting to Workstations, Servers, or RoutersInstalling a Fiber Optic Module Automatic MDI/MDIX DetectionCleaning the Fiber-Optic Connectors Testing ConnectivityObserving LEDs Cabling a Fiber Optic ModuleTable 4.2 Network Connection-Related LED States Troubleshooting Network ConnectionsDesired MeaningFoundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide Using the Temperature Sensor on the FastIron LS Managing FastIron LS Temperature SettingsChapter Maintaining the FastIron LS Hardware Table 5.1 Chapter ContentsDisplaying Syslog Messages for Temperature on the FastIron LS Displaying the Temperature on the FastIron LSFLS648 Switch show chassis Power supply 1 not present Power supply 2 NA - AC - Regular present, status ok Fan 1 failedFLS648 Switch# show log Installing or Replacing a 10-Gigabit Ethernet Module Hardware Maintenance ScheduleDisplaying Management Module CPU Usage Changing the Temperature Polling IntervalReplacing a Fiber Optic Module Installing an Optional Module into the SwitchRemoving a 10-Gigabit Ethernet Module Removing a Fiber Optic Module Installing a New Fiber Optic ModuleBail Latch Cabling a Fiber Optic Module Cleaning the Fiber-Optic ConnectorsDigital Optical Monitoring Table 5.2 Status Value Description Supported MediaStatus Value no optical-monitor alarm interval CLI Commandsshow optic port/slotnumber September Diagnosing Switch Indicators Chapter TroubleshootingTable 0.1 Troubleshooting Chart SymptomInstallation Power and Cooling ProblemsIn-Band Access Table 0.2 Chapter Contents Chapter Hardware SpecificationsFastIron LS specifications Redundant Power supply specificationsPhysical Dimensions FastIron LS SpecificationsEnvironmental Considerations Operating EnvironmentStorage Environment CoolingMean Time Before Failure Table 0.7 Storage EnvironmentTable 0.10 Fan Noise Levels for FastIron LS 48-Port Switch Table 0.9 Fan Noise Levels for FastIron LS 24-Port SwitchChassis side Fan SpeedFCC CFR 47 Part 15 Warning Regulatory ComplianceCISPR 22 CLASS A Warning Table 0.11 Regulatory Compliance and Safety Approvals CertificationsPinouts and Signaling WarrantyVCCI Serial Console Port PinoutsLC connector for Connector TypeTable 0.12 Cable length summary table Cable Type1Cable Type Table 0.12 Cable length summary table ContinuedSpecifications AC Power SupplyTable 0.13 Specifications for AC Power PropertyPower Cords Redundant Power Supply SpecificationsKey features Physical Dimensions and WeightElectromagnetic Compatibility EMC and Immunity Standards Input ConnectorTable 0.15 Input Connector for Power Supplies Input Connector PropertiesSafety Warnings Safety Agency Approvals and CertificationsEnvironmental Considerations Table 0.17 Safety Warning Labels on Power SuppliesInput specifications Electrical SpecificationsTable 0.20 Input Specifications for Power Supplies Table 0.19 Mean Time Before Failure SpecifiationsSeptember U.S.A Appendix A Regulatory StatementsIndustry Canada Statement Europe and AustraliaSeptember Cautions Appendix B Cautions and WarningsFoundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide Cautions and Warnings CAUTION Never leave tools inside the device Warnings Page Foundry FastIron LS Layer 2 Compact Switch Hardware Installation Guide