Force10 Networks E1200i Auto-negotiation, View the Management interface’s physical settings, Port

Step Command Task (continued)

BOOT_USER # boot change primary

	'.' = clear field;	'-' = go to previous field
	boot device		: flash
	file name		: /E1200-3.x.bin
	BOOT_USER # boot change default
	'.' = clear field;	'-' = go to previous field
	boot device		: flash
	file name		: /E1200-3.x.bin
	BOOT_USER #
6.	interface	• (OPTIONAL) Use these commands to set the speed and duplex settings
	management port		for the Management interface.The default setting is full-duplex and
	config 100m		auto-negotiation.
	interface	• Use the interface management port config show command to
	management port		view the Management interface’s physical settings.
	config 10m
	interface
	management port
	config
	auto-negotiate
	interface
	management port
	config no
	auto-negotiate
	interface
	management port
	config full-duplex
	interface
	management port
	config half-duplex
	interface
	management port
	config show
7.	show interface	• Use the show interface management ethernet command to
	management		display the IP address and network mask of the management Ethernet
	ethernet		port.
	interface	•	If the show command output does not display configured IP address
	management		information, use the interface management ethernet ip
			address ip-address ip-address-mask command to set the IP
	ethernet ip
			address of the Management Ethernet port for network (ftp/tftp) operating

address ip-address	system boot.
ip-address-mask

Installing and Maintaining the E1200i System 83