New DC Power Matrix X System Installations
If the system is a new Matrix X DC‐powered installation, follow this procedure to verify DC power compliance of all modules:
1.Obtain the model name and serial number from the front panel of each module to be installed.
2.Using the model name and serial number, fill out the worksheet in Table 1‐2.
Table 1-2 Worksheet: DC Compliance of Modules for New DC Systems
Model Part No. |
| Front Panel Serial Number |
| DC Compliant? | ||
|
|
|
|
|
|
|
| Last 4 digits of | Date Code | Serial | Site | 940 |
|
| 940 Number | (year, work | Number | Code | Revision |
|
|
| week) | Counter |
|
|
|
|
|
|
|
|
|
|
Example: | 4179 | 0747 | 5281 | 63 | 5A | YES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.Compare the values in the shaded cells of the completed worksheet in Table 1‐2 to the minimum values shown in Table 1‐3 on page 1‐8 to determine the DC compliance of the modules to be installed.
Matrix X Router DC Power Supply Installation Guide