
Table 1-3 Minimum Revision of X Modules for DC Power
Model Name | Minimum 940 Part Number | Minimum 940 Revision |
|
|
|
4179 | 5A1 | |
4167 | 5A2 | |
4161 | 5A3 | |
4054 | 5H | |
|
|
|
4162 | 5A | |
|
|
|
3977 | 5A | |
|
|
|
4059 | 5C | |
|
|
|
4055 | 5B | |
|
|
|
4050 | 5B | |
|
|
|
4085 | 5B | |
|
|
|
| N/A | N/A |
1.Exception: If an
2.Exception: If an
3.Exception: If an
Prepare Site Wiring for DC Power Installation
1.Ensure that a branch circuit disconnect device is installed, and that the device is switched to prevent power from being supplied to the DC power supply.
2.If desired, attach your wiring to the 2‐hole compression lugs provided.
For your convenience, Enterasys Networks ships with the DC power supply two 2‐hole compression lugs to which you can connect your wiring (6 AWG). These compression lugs are the correct size to fit over the positive and negative terminal studs. See Chapter 2, DC Power Supply Specifications for more details about the compression lugs.