Enterasys Networks 3000 Modulation Type, Network Configuration, Operating Frequency, Power Supply

Page 44

General Specifications

Modulation Type

802.11a: BPSK, QPSK, 16‐QAM, 64‐QAM

802.11g: CCK, BPSK, QPSK, OFDM

802.11b: CCK, BPSK, QPSK

Network Configuration

Infrastructure

Operating Frequency

802.11a:

5.15to 5.25 GHz (lower band) US/Canada, Japan

5.25to 5.35 GHz (middle band) US/Canada 5.725 to 5.825 GHz (upper band) US/Canada

5.50to 5.70 GHz Europe

802.11b/g:

2.4to 2.4835 GHz (US, Canada, ETSI)

2.4to 2.497 GHz (Japan)

Power Supply

Input: 100 to 240 AC, 50 to 60 Hz

Output: 5.1 Vdc, 3A

Power consumption: 13.2 watts

802.3af compliant: Input voltage: 48 volts, 0.27A, 12.96 watts

Note: Power can also be provided to the access point through the Ethernet port based on IEEE 802.3af Power over Ethernet (PoE) specifications. When both PoE is provided and the adapter is plugged in, PoE will be turned off.

Physical Size

21.83 x 13.73 x 3.27 cm (8.60 x 5.40 x 1.29 in.)

Weight

0.80 kg (1.76 lb)

LED Indicators

PWR (Power), Ethernet Link (Ethernet Link/Activity), 802.11a and 802.11g (Wireless Link/ Activity)

A-2 Specifications

Image 44
Contents RoamAbout Page Page Europe European Union Notice Interference Statement FIN Approved Countries RBT3K-AG5150 5350-MHz 12400 -2483.5 MHz RBT3K-AG5150 5350 MHz 12400 2483.5 MHz Portugal Enterasys Networks, Inc Firmware License Agreement Page Page Xii Contents Figures About This Guide Purpose of This ManualIntended Audience Associated DocumentsGetting Help World Wide Web PhoneOverview Kit ChecklistIntroduction ‐1 displays the top view and back panel of the Access Point Hardware DescriptionAntennas LED IndicatorsComponent Description Reset Button Security SlotConsole Port Ethernet PortApplications Features and BenefitsPower Connector Applications Introduction Hardware Installation Preparing to InstallMounting the Access Point Mounting on a Horizontal SurfaceMounting on a Wall Mounting the Access Point Mounting on the Ceiling Removing the Access Point from the Mounting Bracket Connecting the Cables Lock Console POE Connecting the Cables Hardware Installation Required Connections Initial ConfigurationUsing the CLI Initial Configuration Using the CLI Disable DHCP. Type no ip dhcp Using the CLI Using Web Management Using Web Management Using Web Management Using Web Management Click the Management Vlan Enable radio button Login Specifications General SpecificationsNetwork Configuration Power SupplyWeight Modulation TypeTemperature Radio Signal CertificationNetwork Management HumiditySafety StandardsSensitivity 802.11a802.11g 802.11bTransmit Power Default Settings Feature Parameter DefaultVlan WEP Feature Parameter Default Cables and Pin-outs Twisted-Pair Cable AssignmentsStraight-Through Wiring 10/100BASE-TX Pin AssignmentsCrossover Wiring Console Port Pin AssignmentsRTS request to send CTS clear to send Unused Troubleshooting Troubleshooting StepsTroubleshooting Steps Maximum Distance Tables Maximum Distance Tables Troubleshooting