2
Hardware Installation
Preparing to Install
Choose a proper place for the access point. The best location is at the center of your wireless coverage area, within line of sight of all wireless devices. Try to place the access point in a position that can best cover its Basic Service Set (refer to RoamAbout Access Point 3000 Configuration Guide). Normally, the higher you place the access point, the better the performance.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Eléctrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes Personal vorgenommen werden.
Mounting the Access Point
The access point can be mounted on any horizontal surface, wall or ceiling.
Mounting on a Horizontal Surface
To keep the access point from sliding on the surface, attach the four rubber feet provided in the kit to the embossed circles on the bottom of the access point, as shown below.
RoamAbout Access Point 3000 Hardware Installation Guide