Enterasys Networks 3000 manual RTS request to send CTS clear to send Unused

Console Port Pin Assignments

Table C-1 Wiring Map for Serial Cable (continued)

Signal (serial port)	Pin	Signal (management console port)
RTS (request to send)	8	CTS (clear to send)
Unused	9	Unused

Note: The left hand column pin assignments are for the female DB-9 connector on the access point. Pin 2 (TXD or “transmit data”) must emerge on the management console’s end of the connection as RXD (“receive data”). Pin 7 (CTS or “clear to send”) must emerge on the management console’s end of the connection as RTS (“request to send”).

Table C-2 Serial Cable Signal Directions for DB-9 Ports

DB-9 to DB-9 AP				Terminal or PC
1	Reserved	1
2		2
3	Reserved	3
4				4
	Reserved
5		5
6
	Reserved		6
7		7
8		8
9		9

Table C-3 Serial Cable Signal Directions for DB-25 Ports

DB-9 to DB-25 AP				Terminal or PC
1	Reserved	8
2		3
3	Reserved	2
4				20
	Reserved
5		7
6
	Reserved		6
7		4
8		5
9		22

C-4 Cables and Pin-outs