EnGenius Technologies ECB3500 user manual Antenna

Page 28

11b/g Wireless Long Range Multi-function 7+1 AP

Version 1.2

Data Rate: If you would like to force a data rate, you may select one from the drop- down list. However, for best performance it is recommended to use the Auto setting.

Transmit Power: You may have the different application distance of the device by selecting a value from the drop-down list. This feature can be helpful in restricting the coverage area of the wireless network.

Antenna:

Fragment: Packets over the specified size will be fragmented in order to improve performance on noisy networks.

RTS Threshold: Packets over the specified size will use the RTS/CTS mechanism to maintain performance in noisy networks and preventing hidden nodes from degrading the performance.

Protection Mode: If your wireless network is using both 802.11b and 802.g devices then it is recommended to enable this feature so that the 802.11b devices will not degrade the performance of 802.11g devices.

WMM: Choose to enable or disable wireless multimedia mode.

Click on the Apply button to save the changes.

28

Image 28

Contents ECB3500 Table of Contents Cliet Bridge Operatig Mode Repeater Operatig Mode Federal Communication Commission Interference Statement Revision History Features & Benefits IntroductionPackage Contents Safety GuidelinesSystem Requirements Network ConfigurationApplications Ad-hoc peer-to-peer Mode 11b/g Wireless Long Range Multi-function 7+1 AP Version IP Address Configuration Hardware InstallationUnderstanding the Hardware 11b/g Wireless Long Range Multi-function 7+1 AP Version Switching Between Operating Modes 1Logging11b/g Wireless Long Range Multi-function 7+1 AP Version Access Point / WDS Operating Mode Access PointLogging StatusMain System Log Wireless Client ListSystem IP Settings System PropertiesSpanning Tree Settings Wireless Wireless NetworkWireless Security WEP 11b/g Wireless Long Range Multi-function 7+1 AP Version Wireless Security WPA-PSK, WPA2-PSK, WPA-Mixed Wireless Security WPA, WPA2Wireless MAC Filter WDS Link Settings Wireless Advanced SettingsAntenna Administration ManagementSnmp Settings Management VlanBackup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 7 LogClient Bridge Operating Mode Status Connection Status System Log System Spanning Tree Settings Click on the Apply button to save the changes Prefer Bssid WDS Support Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log WDS Bridge Operating Mode Status WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Security WEP Wireless Advanced Settings Management Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Repeater Operating Mode Status Wireless Client List System Log System IP Settings Wireless Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log AP Router Operating Mode Status Dhcp Client List System Properties Router WAN SettingsWAN Dhcp WAN Static IP 11b/g Wireless Long Range Multi-function 7+1 AP Version WAN PPPoE VPN Pass Through Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter WDS Link Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Client Router Operating Mode 2Status Connection Status System Log 100 101 102 103 104 105 Prefer Bssid 107 108 109 110 111 112 Hardware Spécifications Appendix a SpecificationsRF Spécifications Software Features Environment & PhysicalPage Appendix B FCC Interference Statement Federal Communication Commission Interference StatementAppendix C IC Interference Statement Industry Canada statement