EnGenius Technologies ECB3500 user manual Firmware Upgrade

Page 32

11b/g Wireless Long Range Multi-function 7+1 AP

Version 1.2

Save a copy of the current settings: Click on the Backup button to save the current configuration.

Restore saved settings from a file: Once a file has been backed up, you may restore it by clicking on the Browse button to select the file, and then the Restore button.

Revert to factory default settings: Click on the Factory Default Settings button to reset the device to the default settings. Please wait while the device restart and then access the device using the default IP address: 192.168.1.1

4.5.5 Firmware Upgrade

Click on the Upgrade Firmware link under the Management menu. This page is used to upgrade the firmware on the device. Make sure that downloaded the appropriate firmware from your vendor.

Click on the Browse button and then select the appropriate firmware and then click on the Upgrade button.

Note: The upgrade process may take about 1 minute to complete. Do not power off the device during this process as it may crash the device and make it unusable. The device will restart automatically once the upgrade is complete.

32

Image 32

Contents ECB3500 Table of Contents Cliet Bridge Operatig Mode Repeater Operatig Mode Federal Communication Commission Interference Statement Revision History Features & Benefits IntroductionPackage Contents Safety GuidelinesApplications Network ConfigurationSystem Requirements Ad-hoc peer-to-peer Mode 11b/g Wireless Long Range Multi-function 7+1 AP Version Understanding the Hardware Hardware InstallationIP Address Configuration 11b/g Wireless Long Range Multi-function 7+1 AP Version Switching Between Operating Modes 1Logging11b/g Wireless Long Range Multi-function 7+1 AP Version Access Point / WDS Operating Mode Access PointLogging StatusMain System Wireless Client ListSystem Log IP Settings System PropertiesSpanning Tree Settings Wireless Wireless NetworkWireless Security WEP 11b/g Wireless Long Range Multi-function 7+1 AP Version Wireless Security WPA-PSK, WPA2-PSK, WPA-Mixed Wireless Security WPA, WPA2Wireless MAC Filter WDS Link Settings Wireless Advanced SettingsAntenna Administration ManagementSnmp Settings Management VlanBackup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 7 LogClient Bridge Operating Mode Status Connection Status System Log System Spanning Tree Settings Click on the Apply button to save the changes Prefer Bssid WDS Support Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log WDS Bridge Operating Mode Status WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Security WEP Wireless Advanced Settings Management Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Repeater Operating Mode Status Wireless Client List System Log System IP Settings Wireless Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log AP Router Operating Mode Status Dhcp Client List System Properties WAN Dhcp WAN SettingsRouter WAN Static IP 11b/g Wireless Long Range Multi-function 7+1 AP Version WAN PPPoE VPN Pass Through Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter WDS Link Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Client Router Operating Mode 2Status Connection Status System Log 100 101 102 103 104 105 Prefer Bssid 107 108 109 110 111 112 RF Spécifications Appendix a SpecificationsHardware Spécifications Software Features Environment & PhysicalPage Appendix B FCC Interference Statement Federal Communication Commission Interference StatementAppendix C IC Interference Statement Industry Canada statement