EnGenius Technologies ECB3500 user manual 6 Log

Page 77

11b/g Wireless Long Range Multi-function 7+1 AP

Version 1.2

Manually Set Date and Time: Specify the date and time

Automatically Get Date and Time: Select the time zone from the drop down list and then specify the IP address of the NTP server.

Click on the Apply button to save the changes.

7.5.6 Log

Click on the Log link under the Management menu. The Log page displays a list of events that are triggered on the Ethernet and Wireless interface. This log can be referred when an unknown error occurs on the system or when a report needs to be sent to the technical support department for debugging purposes.

Syslog: Choose to enable or disable the system log.

Log Server IP Address: Specify the IP address of the server that will receive the system log.

Local Log: Choose to enable or disable the local log.

Click on the Apply button to save the changes.

77

Image 77

Contents ECB3500 Table of Contents Cliet Bridge Operatig Mode Repeater Operatig Mode Federal Communication Commission Interference Statement Revision History Introduction Features & BenefitsSafety Guidelines Package ContentsApplications Network ConfigurationSystem Requirements Ad-hoc peer-to-peer Mode 11b/g Wireless Long Range Multi-function 7+1 AP Version Understanding the Hardware Hardware InstallationIP Address Configuration 11b/g Wireless Long Range Multi-function 7+1 AP Version 1Logging Switching Between Operating Modes11b/g Wireless Long Range Multi-function 7+1 AP Version Access Point Access Point / WDS Operating ModeStatus LoggingMain System Wireless Client ListSystem Log System Properties IP SettingsSpanning Tree Settings Wireless Network WirelessWireless Security WEP 11b/g Wireless Long Range Multi-function 7+1 AP Version Wireless Security WPA, WPA2 Wireless Security WPA-PSK, WPA2-PSK, WPA-MixedWireless MAC Filter Wireless Advanced Settings WDS Link SettingsAntenna Management AdministrationManagement Vlan Snmp SettingsBackup/Restore settings, Reset to factory default settings Firmware Upgrade 7 Log Time SettingsClient Bridge Operating Mode Status Connection Status System Log System Spanning Tree Settings Click on the Apply button to save the changes Prefer Bssid WDS Support Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log WDS Bridge Operating Mode Status WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Security WEP Wireless Advanced Settings Management Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Repeater Operating Mode Status Wireless Client List System Log System IP Settings Wireless Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log AP Router Operating Mode Status Dhcp Client List System Properties WAN Dhcp WAN SettingsRouter WAN Static IP 11b/g Wireless Long Range Multi-function 7+1 AP Version WAN PPPoE VPN Pass Through Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter WDS Link Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Client Router Operating Mode 2Status Connection Status System Log 100 101 102 103 104 105 Prefer Bssid 107 108 109 110 111 112 RF Spécifications Appendix a SpecificationsHardware Spécifications Environment & Physical Software FeaturesPage Federal Communication Commission Interference Statement Appendix B FCC Interference StatementIndustry Canada statement Appendix C IC Interference Statement