EnGenius Technologies ECB3500 user manual Understanding the Hardware, Hardware Installation

Page 12

11b/g Wireless Long Range Multi-function 7+1 AP

Version 1.2

2 Understanding the Hardware

2.1 Hardware Installation

1Place the unit in an appropriate place after conducting a site survey.

2Plug one end of the Ethernet cable into the RJ-45 port on the rear panel of the device and another end into your PC/Notebook.

3Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the power socket on the wall.

This diagram depicts the hardware configuration

PC

Ethernet

Access Point

AC/DC cable

Power Outlet

3.1 IP Address Configuration

This device can be configured as a Bridge/Router or Access Point. The default IP address of the device is 192.168.1.1 In order to log into this device, you must first configure the TCP/IP settings of your PC/Notebook.

1.In the control panel, double click Network Connections and then double click on the connection of your Network Interface Card (NIC). You will then see the following screen.

12

Image 12

Contents ECB3500 Table of Contents Cliet Bridge Operatig Mode Repeater Operatig Mode Federal Communication Commission Interference Statement Revision History Features & Benefits IntroductionPackage Contents Safety GuidelinesNetwork Configuration System RequirementsApplications Ad-hoc peer-to-peer Mode 11b/g Wireless Long Range Multi-function 7+1 AP Version Hardware Installation IP Address ConfigurationUnderstanding the Hardware 11b/g Wireless Long Range Multi-function 7+1 AP Version Switching Between Operating Modes 1Logging11b/g Wireless Long Range Multi-function 7+1 AP Version Access Point / WDS Operating Mode Access PointLogging StatusMain Wireless Client List System LogSystem IP Settings System PropertiesSpanning Tree Settings Wireless Wireless NetworkWireless Security WEP 11b/g Wireless Long Range Multi-function 7+1 AP Version Wireless Security WPA-PSK, WPA2-PSK, WPA-Mixed Wireless Security WPA, WPA2Wireless MAC Filter WDS Link Settings Wireless Advanced SettingsAntenna Administration ManagementSnmp Settings Management VlanBackup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 7 LogClient Bridge Operating Mode Status Connection Status System Log System Spanning Tree Settings Click on the Apply button to save the changes Prefer Bssid WDS Support Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log WDS Bridge Operating Mode Status WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Security WEP Wireless Advanced Settings Management Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Repeater Operating Mode Status Wireless Client List System Log System IP Settings Wireless Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log AP Router Operating Mode Status Dhcp Client List System Properties WAN Settings RouterWAN Dhcp WAN Static IP 11b/g Wireless Long Range Multi-function 7+1 AP Version WAN PPPoE VPN Pass Through Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter WDS Link Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Client Router Operating Mode 2Status Connection Status System Log 100 101 102 103 104 105 Prefer Bssid 107 108 109 110 111 112 Appendix a Specifications Hardware SpécificationsRF Spécifications Software Features Environment & PhysicalPage Appendix B FCC Interference Statement Federal Communication Commission Interference StatementAppendix C IC Interference Statement Industry Canada statement