EnGenius Technologies ECB3500 user manual Time Settings

Page 94

11b/g Wireless Long Range Multi-function 7+1 AP

Version 1.2

Click on the Browse button and then select the appropriate firmware and then click on the Upgrade button.

Note: The upgrade process may take about 1 minute to complete. Do not power off the device during this process as it may crash the device and make it unusable. The device will restart automatically once the upgrade is complete.

8.6.5 Time Settings

Click on the Time Settings link under the Management menu. This page allows you to configure the time on the device. You may do this manually or by connecting to a NTP server.

Manually Set Date and Time: Specify the date and time

Automatically Get Date and Time: Select the time zone from the drop down list and then specify the IP address of the NTP server.

Click on the Apply button to save the changes.

8.6.6 Log

Click on the Log link under the Management menu. The Log page displays a list of events that are triggered on the Ethernet and Wireless interface. This log can be referred when an unknown error occurs on the system or when a report needs to be sent to the technical support department for debugging purposes.

94

Image 94

Contents ECB3500 Table of Contents Cliet Bridge Operatig Mode Repeater Operatig Mode Federal Communication Commission Interference Statement Revision History Features & Benefits IntroductionPackage Contents Safety GuidelinesSystem Requirements Network ConfigurationApplications Ad-hoc peer-to-peer Mode 11b/g Wireless Long Range Multi-function 7+1 AP Version IP Address Configuration Hardware InstallationUnderstanding the Hardware 11b/g Wireless Long Range Multi-function 7+1 AP Version Switching Between Operating Modes 1Logging11b/g Wireless Long Range Multi-function 7+1 AP Version Access Point / WDS Operating Mode Access PointLogging StatusMain System Log Wireless Client ListSystem IP Settings System PropertiesSpanning Tree Settings Wireless Wireless NetworkWireless Security WEP 11b/g Wireless Long Range Multi-function 7+1 AP Version Wireless Security WPA-PSK, WPA2-PSK, WPA-Mixed Wireless Security WPA, WPA2Wireless MAC Filter WDS Link Settings Wireless Advanced SettingsAntenna Administration ManagementSnmp Settings Management VlanBackup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 7 LogClient Bridge Operating Mode Status Connection Status System Log System Spanning Tree Settings Click on the Apply button to save the changes Prefer Bssid WDS Support Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log WDS Bridge Operating Mode Status WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Security WEP Wireless Advanced Settings Management Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Repeater Operating Mode Status Wireless Client List System Log System IP Settings Wireless Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log AP Router Operating Mode Status Dhcp Client List System Properties Router WAN SettingsWAN Dhcp WAN Static IP 11b/g Wireless Long Range Multi-function 7+1 AP Version WAN PPPoE VPN Pass Through Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter WDS Link Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Client Router Operating Mode 2Status Connection Status System Log 100 101 102 103 104 105 Prefer Bssid 107 108 109 110 111 112 Hardware Spécifications Appendix a SpecificationsRF Spécifications Software Features Environment & PhysicalPage Appendix B FCC Interference Statement Federal Communication Commission Interference StatementAppendix C IC Interference Statement Industry Canada statement