EnGenius Technologies ECB3500 Wireless Security WPA-PSK, WPA2-PSK, Wireless Advanced Settings

Page 43

11b/g Wireless Long Range Multi-function 7+1 AP

Version 1.2

￿Key Length: Select a key format from the drop-down list. 64bit-hex keys require 10 characters, where as 128-bit keys require 26 characters. A hex key is defined as a number between 0 through 9 and letter between A through F.

￿Default Key: You may use up to four different keys for four different networks. Select the current key that will be used.

￿Key 1-4: You may enter four different WEP keys.

￿Click on the Apply button to save the changes.

5.4.3 Wireless Security – WPA-PSK, WPA2-PSK,

￿Security Mode: Select WPA-PSK,or WPA2-PSKfrom the drop-down list if your wireless network uses WPA pre-shared key.

￿Encryption: Select TKIP or AES from the drop-down list if your wireless network uses this encryption. WPA (Wi-Fi Protected Access) was designed to improve upon the security features of WEP (Wired Equivalent Privacy). The technology is designed to work with existing Wi-Fi products that have been enabled with WEP. WPA provides improved data encryption through the Temporal Integrity Protocol (TKIP), which scrambles the keys using a hashing algorithm and by adding an integrity checking feature which makes sure that keys haven’t been tampered with.

￿Passphrase: Specify a passphrase that is shared amongst the Access Points and clients.

￿Click on the Apply button to save the changes.

5.4.4 Wireless Advanced Settings

￿Click on the Wireless Advanced Settings link. On this page you can configure the advanced settings to tweak the performance of your wireless network. Options available are: data rate, transmit power, antenna diversity, fragmentation threshold, RTS threshold, 802.11g protection and distance.

43

Image 43
Contents ECB3500 Table of Contents Cliet Bridge Operatig Mode Repeater Operatig Mode Federal Communication Commission Interference Statement Revision History Introduction Features & BenefitsSafety Guidelines Package ContentsSystem Requirements Network ConfigurationApplications Ad-hoc peer-to-peer Mode 11b/g Wireless Long Range Multi-function 7+1 AP Version IP Address Configuration Hardware InstallationUnderstanding the Hardware 11b/g Wireless Long Range Multi-function 7+1 AP Version 1Logging Switching Between Operating Modes11b/g Wireless Long Range Multi-function 7+1 AP Version Access Point Access Point / WDS Operating ModeStatus LoggingMain System Log Wireless Client ListSystem System Properties IP SettingsSpanning Tree Settings Wireless Network WirelessWireless Security WEP 11b/g Wireless Long Range Multi-function 7+1 AP Version Wireless Security WPA, WPA2 Wireless Security WPA-PSK, WPA2-PSK, WPA-MixedWireless MAC Filter Wireless Advanced Settings WDS Link SettingsAntenna Management AdministrationManagement Vlan Snmp SettingsBackup/Restore settings, Reset to factory default settings Firmware Upgrade 7 Log Time SettingsClient Bridge Operating Mode Status Connection Status System Log System Spanning Tree Settings Click on the Apply button to save the changes Prefer Bssid WDS Support Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log WDS Bridge Operating Mode Status WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Security WEP Wireless Advanced Settings Management Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Repeater Operating Mode Status Wireless Client List System Log System IP Settings Wireless Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log AP Router Operating Mode Status Dhcp Client List System Properties Router WAN SettingsWAN Dhcp WAN Static IP 11b/g Wireless Long Range Multi-function 7+1 AP Version WAN PPPoE VPN Pass Through Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter WDS Link Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Client Router Operating Mode 2Status Connection Status System Log 100 101 102 103 104 105 Prefer Bssid 107 108 109 110 111 112 Hardware Spécifications Appendix a SpecificationsRF Spécifications Environment & Physical Software FeaturesPage Federal Communication Commission Interference Statement Appendix B FCC Interference StatementIndustry Canada statement Appendix C IC Interference Statement