EnGenius Technologies ECB3500 user manual Logging, Status

Page 17

11b/g Wireless Long Range Multi-function 7+1 AP

Version 1.2

4.1 Logging In

To configure the device through the web-browser, enter the IP address of the device (default: 192.168.1.1) into the address bar of the web-browser and press Enter.

Make sure that the device and your computers are configured on the same subnet. Refer to Chapter 2 in order to configure the IP address of your computer.

After connecting to the IP address, the web-browser will display the login page.

Specify admin for both the user name and password.

After logging in you will graphical user interface (GUI) of the device. The navigation

drop-down menu on left is divided into four sections:

1.Status: Displays the overall status, wireless client list, and system log.

2.System: This menu includes the system properties, IP and Spanning Tree settings.

3.Wireless: This menu includes wireless network status, MAC filter, WDS settings, and wireless advanced settings.

4.Management: This menu includes the admin setup, SNMP, VLAN management, firmware upgrade, and save/restore backup.

4.2 Status

Click on the Status link on the navigation drop- down menu. You will then see three options: Main,

17

Image 17

Contents ECB3500 Table of Contents Cliet Bridge Operatig Mode Repeater Operatig Mode Federal Communication Commission Interference Statement Revision History Introduction Features & BenefitsSafety Guidelines Package ContentsApplications Network ConfigurationSystem Requirements Ad-hoc peer-to-peer Mode 11b/g Wireless Long Range Multi-function 7+1 AP Version Understanding the Hardware Hardware InstallationIP Address Configuration 11b/g Wireless Long Range Multi-function 7+1 AP Version 1Logging Switching Between Operating Modes11b/g Wireless Long Range Multi-function 7+1 AP Version Access Point Access Point / WDS Operating ModeStatus LoggingMain System Wireless Client ListSystem Log System Properties IP SettingsSpanning Tree Settings Wireless Network WirelessWireless Security WEP 11b/g Wireless Long Range Multi-function 7+1 AP Version Wireless Security WPA, WPA2 Wireless Security WPA-PSK, WPA2-PSK, WPA-MixedWireless MAC Filter Wireless Advanced Settings WDS Link SettingsAntenna Management AdministrationManagement Vlan Snmp SettingsBackup/Restore settings, Reset to factory default settings Firmware Upgrade 7 Log Time SettingsClient Bridge Operating Mode Status Connection Status System Log System Spanning Tree Settings Click on the Apply button to save the changes Prefer Bssid WDS Support Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log WDS Bridge Operating Mode Status WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Security WEP Wireless Advanced Settings Management Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Repeater Operating Mode Status Wireless Client List System Log System IP Settings Wireless Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log AP Router Operating Mode Status Dhcp Client List System Properties WAN Dhcp WAN SettingsRouter WAN Static IP 11b/g Wireless Long Range Multi-function 7+1 AP Version WAN PPPoE VPN Pass Through Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter WDS Link Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Client Router Operating Mode 2Status Connection Status System Log 100 101 102 103 104 105 Prefer Bssid 107 108 109 110 111 112 RF Spécifications Appendix a SpecificationsHardware Spécifications Environment & Physical Software FeaturesPage Federal Communication Commission Interference Statement Appendix B FCC Interference StatementIndustry Canada statement Appendix C IC Interference Statement