EnGenius Technologies ECB3500 Backup/Restore settings, Reset to factory default settings

Page 31

11b/g Wireless Long Range Multi-function 7+1 AP

Version 1.2

SNMP Enable/Disable: Choose to enable or disable the SNMP feature.

Contact: Specify the contact details of the device.

Location: Specify the location of the device.

Read-Only Community Name: Specify the password for access the SNMP community for read only access.

Read-Write Community Name: Specify the password for access to the SNMP community with read/write access.

Trap Destination IP Address: Specify the IP address of the computer that will receive the SNMP traps.

Trap Destination Community Name: Specify the password for the SNMP trap community.

Click on the Apply button to save the changes.

4.5.4 Backup/Restore settings, Reset to factory default settings

Click on the Backup/Restore Setting link under the Management menu. This option is used to save the current settings of the device in a file on your local disk or load settings on to the device from a local disk. This feature is very handy for administrators who have several devices that need to be configured with the same settings.

31

Image 31

Contents ECB3500 Table of Contents Cliet Bridge Operatig Mode Repeater Operatig Mode Federal Communication Commission Interference Statement Revision History Introduction Features & BenefitsSafety Guidelines Package ContentsSystem Requirements Network ConfigurationApplications Ad-hoc peer-to-peer Mode 11b/g Wireless Long Range Multi-function 7+1 AP Version IP Address Configuration Hardware InstallationUnderstanding the Hardware 11b/g Wireless Long Range Multi-function 7+1 AP Version 1Logging Switching Between Operating Modes11b/g Wireless Long Range Multi-function 7+1 AP Version Access Point Access Point / WDS Operating ModeStatus LoggingMain System Log Wireless Client ListSystem System Properties IP SettingsSpanning Tree Settings Wireless Network WirelessWireless Security WEP 11b/g Wireless Long Range Multi-function 7+1 AP Version Wireless Security WPA, WPA2 Wireless Security WPA-PSK, WPA2-PSK, WPA-MixedWireless MAC Filter Wireless Advanced Settings WDS Link SettingsAntenna Management AdministrationManagement Vlan Snmp SettingsBackup/Restore settings, Reset to factory default settings Firmware Upgrade 7 Log Time SettingsClient Bridge Operating Mode Status Connection Status System Log System Spanning Tree Settings Click on the Apply button to save the changes Prefer Bssid WDS Support Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log WDS Bridge Operating Mode Status WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Security WEP Wireless Advanced Settings Management Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Repeater Operating Mode Status Wireless Client List System Log System IP Settings Wireless Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter Management Administration Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log AP Router Operating Mode Status Dhcp Client List System Properties Router WAN SettingsWAN Dhcp WAN Static IP 11b/g Wireless Long Range Multi-function 7+1 AP Version WAN PPPoE VPN Pass Through Wireless Security WEP Wireless Security WPA-PSK, WPA2-PSK Wireless MAC Filter WDS Link Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings 11b/g Wireless Long Range Multi-function 7+1 AP Version Client Router Operating Mode 2Status Connection Status System Log 100 101 102 103 104 105 Prefer Bssid 107 108 109 110 111 112 Hardware Spécifications Appendix a SpecificationsRF Spécifications Environment & Physical Software FeaturesPage Federal Communication Commission Interference Statement Appendix B FCC Interference StatementIndustry Canada statement Appendix C IC Interference Statement