11b/g Wireless Long Range | Version 1.2 |
Device Name: Specify a name for the device (this is not the SSID),
Country/Region: Select a country from the
Operating Mode: Select and operating mode. Configuration for each operating mode is described in their respective chapters.
Click on the Apply button to save the changes.
7.3.2 IP Settings
Click on the IP Settings link under the System
IP Network Setting: Select Obtain an IP address automatically (DHCP) radio button if the Access Point is connected to a DHCP server. This will allow the Access Point to pass IP addresses to the clients associated with it. You may select Specify an IP Address radio button if you would like the device to use a static IP address. In this case, you would be required to specify an IP address, subnet mask, and default gateway IP address.
IP Address: Specify an IP address
IP Subnet Mask: Specify the subnet mask for the IP address
Default Gateway: Specify the IP address of the default gateway.
Click on the Apply button to save the changes.
7.3.3 Spanning Tree Settings
Click on the Spanning Tree link under the System
68