Main Menu
The Main Menu is the first screen seen after successfully logging into the system. Figure
Vertical Horizon Local Management
Main Menu
System Information Menu...
Management Setup Menu...
Device Control Menu...
Network Monitor Menu...
System Restart Menu...
Exit
Use <TAB> or arrow keys to move. <Enter> to select.
| Figure |
|
|
Selection | Description |
System Information Menu |
|
System Information | Provides basic system description, including contact |
| information. |
Switch Information | Shows hardware/firmware version numbers, power status, |
| and expansion modules used in the stack. |
Management Setup Menu |
|
Network Configuration | Includes IP setup, Ping facility, HTTP (Web Agent) setup, |
| Telnet configuration, and MAC address. |
Serial Port | Sets communication parameters for the serial port, including |
Configuration | management mode, baud rate, console |
| data refresh interval. |
SNMP Configuration | Activates traps; and configures communities and trap |
| managers. |
Console Login | Sets user names and passwords for system access, as well |
Configuration | as the invalid password threshold and lockout time. |
TFTP Download | Downloads new version of firmware to update your system |
| |
Configuration Save & | Saves the switch configuration to a file on a TFTP server. |
Restore | This file can be later downloaded to restore the configuration. |
Management | Specifies if management access to the switch is available |
Configuration | from all VLANs or restricted to one VLAN. |
|