Displaying System Information
Use the System Information screen to display descriptive information about the switch, or for quick system identification as shown in the following figure and table.
Vertical Horizon Local Management
|
| System Information |
|
| |
| System Description : Vertical Horizon |
|
| ||
| System Object ID : 1.3.6.1.4.1.52.3.9.1.10.7 |
|
| ||
| System Up Time | : 48067 (0 day, 1 hr, 2min, 34 sec) | |||
| System Name | : DEFAULT SYSTEM NAME |
|
| |
| System Contact | : DEFAULT SYSTEM CONTACT | |||
| System Location | : DEFAULT SYSTEM LOCATION | |||
| <APPLY> | <OK> | <CANCEL> | ||
| Use <TAB> or arrow keys to move, other keys to make changes. | ||||
|
|
|
| ||
|
| Figure | |||
|
|
|
|
| |
Parameter | Description |
|
|
| |
System Description | System hardware description. | ||||
System Object ID | MIB II object identifier for switch’s network management | ||||
|
| subsystem. |
|
|
|
System Up Time
System Name*
System Contact*
System Location*
Length of time the current management agent has been running. (Note that the first value is 1/100 seconds.)
Name assigned to the switch system.
Contact person for the system.
Specifies the area or location where the system resides.
*Maximum string length is 99, but the screen only displays 45 characters. You can use the arrow keys to browse the whole string.
12 |