Configuring Community Names
The following figure and table describe how to configure the community strings authorized for management access. Up to 5 community names may be entered.
Vertical Horizon Local Management
|
| SNMP Configuration : SNMP Communities |
|
| |||
|
|
|
| Community Name | Access | Status | |
|
| 1. | public | READ ONLY | ENABLED | ||
|
| 2. | private | READ/WRITE | ENABLED | ||
|
| 3. |
|
|
|
|
|
|
| 4. |
|
|
|
|
|
|
| 5. |
|
|
|
|
|
|
| <APPLY> | <OK> | <CANCEL> |
|
| |
| Use <TAB> or arrow keys to move, other keys to make changes. | ||||||
|
|
|
|
| |||
|
| Figure |
|
| |||
|
|
|
|
| |||
Parameter | Description |
|
|
| |||
Community Name | A community entry authorized for management access. | ||||||
|
| Maximum string length : 20 characters |
|
| |||
Access | Management access is restricted to Read Only or Read/Write. | ||||||
Status | Sets administrative status of entry to enabled or disabled. |
Note: The default community strings are “public” with Read Only access, and “private” with Read/Write access.
|