Enterasys Networks VH-2402S manual Configuring the Unicast Address Table

Page 85

Configuring the Unicast Address Table

The Unicast Address Table allows you to designate forwarding treatment through the switch for specific MAC addresses, allowing you to maintain the efficiency and security of your network. You can search for a specific MAC address, clear the entire table, or information associated with a specific address, or set the Aging Time for deleteing inactive entries. The switch learns addresses dynamically from incoming packets and builds a table of these addresses along with their associated ports. There are two types of MAC addresses in the forwarding table:

•Dynamic MAC addresses, which are dynamically learned and removed by the switch based on a time period defined using the Aging Time option.

•Static MAC addresses, which are entered manually, stored in nonvolatile memory and automatically placed in the address table.

There are five types of status that can be configured for each address in the table:

•Permenant, which means that the MAC address is in use and will remain so after the next switch reset.

•Delete On Reset, which means that the MAC address is in use and will remain so until the next switch reset.

•Invalid, which will remove the entry.

•Delete On Time Out, which means that the MAC address is in use and will remain so until it is aged out.

•Other, which means that the MAC address is in use but the conditions under which it will remain so differ from the preceding values.

To configure the Unicast Address Table, do the following:

1.Select Network Monitor Menu from the Main Menu.

2.Select Unicast Address Table.

3.As desired, set the Aging Time for the table, or view, search or clear entries by MAC address or VLAN ID.

To configure a specific MAC address in the table, do the following:

1.From the Network Monitor Menu, select Static Unicast Address Table Configuration.

2.For the MAC address, specify the VLAN ID, switch port and the Status (Permanent, Delete On Reset, Invalid, Delete On Time Out, or Other).

3.Highlight the Set field and press [Enter].

9033645-01

Configuring & Monitoring the Switch 77

Image 85

Contents Management Guide Fast Ethernet SwitchPage 9033645-01 9033645-01 Table of Contents Appendix A. Spanning Tree Concepts Snmp ManagementIndex Vi Table of Contents VH-2402S Management Overview Configuration OptionsRequired Connections Console Port Out-of-Band ConnectionsConfigure the Remote Site Configure the Switch SiteRemote Management via the Console Port In-Band ConnectionsIn-Band Network Connection Management Overview VH-2402S Overview VH-2402S User InterfaceUser Access Factory Default Settings Factory DefaultsGvrp Selection Description Main MenuDisplays/configures extended bridge capabilities provided by System Information Menu System Information MenuSystem Information Displaying System InformationSwitch Information Displaying Switch Version and Module InformationManagement Setup Menu Management Setup MenuNetwork Configuration Changing the Network ConfigurationIP Configuration IP ConfigurationIP Connectivity Test IP Connectivity Test Ping10. Http Configuration Http Configuration11. Serial Port Configuration Configuring the Serial PortAssigning Snmp Parameters 12. Snmp Configuration13. Snmp Communities Configuring Community Names14. IP Trap Managers Configuring IP Trap Managers15. Console Login Configuration Console Login ConfigurationDownloading System Software Using Tftp Protocol to Download Over the NetworkParameter Description Saving the System Configuration18. Management Configuration Configuring Management Access19. Device Control Menu Configuring the SwitchNot implemented in the current firmware release 20. Port Configuration Configuring Port Parameters21. Port Information Viewing the Current Port Configuration22. Spanning Tree Configuration Configuring Bridge STA Using the Spanning Tree AlgorithmDevice with the lowest MAC address will then 24. Spanning Tree Port Configuration Configuring STA for Ports or Modules25. Spanning Tree Information Viewing the Current Spanning Tree Configuration26. Bridge STA Information Displaying the Current Bridge STA27. Spanning Tree Port Information Displaying the Current STA for Ports or ModulesRules defining port status are 28. Mirror Port Configuration Using a Mirror Port for AnalysisConfiguring Port Trunks 29. Port Trunking Configuration Igmp Multicast Filtering 30. Igmp Configuration Configuring Igmp31. Broadcast Storm Control Configuration Configuring Broadcast Storm Control32. Extended Bridge Configuration Configuring Bridge MIB ExtensionsBy setting this parameter to False 33 .1P Configuration Configuring Traffic Classes34 .1P Port Priority Configuration Port Priority Configuration35 .1P Port Traffic Class Information 802.1P Port Traffic Class Information802.1Q Vlan Base Information Configuring Virtual LANs37 .1Q Vlan Current Table Information 802.1Q Vlan Current Table Information38 .1Q Vlan Static Table Configuration 802.1Q Vlan Static Table Configuration39 .1Q Vlan Static Table Configuration Example 40. Port Assignment Vlan Configuration Port Assignment Vlan Configuration41. Multicast Router Port Information Multicast Router Port Information42. Static Multicast Router Port Configuration Static Multicast Router Port Configuration43. Igmp Member Port Configuration Igmp Member Port Configuration44. Port Security Configuration Port Security Configuration45. Network Monitor Menu Monitoring the Switch46. Port Statistics Displaying Port Statistics47. Rmon Statistics Displaying Rmon StatisticsDrop Events 48. Unicast Address Table Displaying the Unicast Address Table49. IP Multicast Registration Table Displaying the IP Multicast Registration Table50. Static Unicast Addreeess Table Configuration Configuring Static Unicast AddressesLogging Off the System Resetting the System66 VH-2402S User Interface Common Tasks Configuring & Monitoring the SwitchSetting Password Protection Connecting via Telnet Checking Network Configuration StatusAssigning an IP Address Viewing Switch Statistics Setting Snmp Management AccessDownloading a Software Upgrade Configuring Port MirroringDownloading Via Tftp Downloading Via the Serial Port9033645-01 Configuring Spanning Tree Parameters Configuring Class of Service Configuring VLANsConfiguring Port Operation Configuring the Unicast Address Table Configuring BootP Setting a Default GatewayConfiguring Port Trunks Configuring & Monitoring the Switch VH-2402S Snmp Protocol Snmp ManagementMIB Objects RFC 1573 Interfaces Evolution MIB RFC 1213 MIB-IIRFC 1643 Ethernet-Like MIB RFC 1493 Bridge MIBIeee 802.1Q Q-MIB Compiling MIB Extensions Enterasys WebsiteEnterasys Proprietary MIB Extensions Appendix A. Spanning Tree Concepts Spanning Tree FeaturesGeneral Spanning Tree Protocol in a Network Figure A-1. Spanning Tree Using VH-2402S SwitchesSpanning Tree Protocol Parameters Table A-1. Spanning Tree Protocol DefaultsSpanning Tree Protocol Operation 9033645-01 Spanning Tree Concepts VH-2402S VLANs and Frame Tagging Appendix B. Virtual Lans VlansAssigning Ports to VLANs VH-2402S Vlan ConfigurationVlan Classification Port OverlappingAutomatic Vlan Registration Forwarding Tagged/Untagged FramesForwarding Traffic with Unknown Vlan Tags Incoming tagged frames contain a priority level range Appendix C. Class of ServiceFigure C-1. Class of Service Example Igmp Snooping and IP Multicast Filtering Appendix D. IP Multicast FilteringPage Index Tftp Page 150524-103 R02