Enterasys Networks VH-2402S manual Igmp Member Port Configuration

IGMP Member Port Configuration

You can use the IGMP Member Port Configuration screen to assign ports that are attached to hosts who want to receive a specific multicast service.

			Vertical Horizon Local Management			-- VH-2402S
				IGMP Member Port Configuration
	Unit Dynamic IGMP Member Port List				Static IGMP Member Port List
	-----------------------------------------------------------------------------------------------------------
	1
	VID	:
	Multicast IP		:	Unit : 1 Port : 1
	[Show]	[More]		[Add]	[Delete]
		<OK>		<PREV UNIT>		<NEXT UNIT>
		Use <TAB> or arrow keys to move. <Enter> to select
	Figure 2-43. IGMP Member Port Configuration
Parameter			Description
Unit			The stack unit ID.
Dynamic IGMP			A list of the switch ports that have been automatically configured
Member Port List			as being attached to a IGMP host.
Static IGMP Member			A list of the switch ports that have been manually configured as
Port List			being attached to a IGMP host.
VID			The VLAN ID number used to sort the list.
Multicast IP			The IP address for a specific multicast service that is used to sort
			the list.
[Show]			Displays settings for the specified VLAN ID and stack unit.
[More]			Displays consecutively numbered stack units.
[Add]			Adds a new host port to the current list.
[Delete]			Removes a host port from the current list.

56 VH-2402S User Interface VH-2402S