Configuring Management Access
Use the Management Configuration menu to define which VLAN has management access to the switch. Parameters shown on this screen are indicated in the following figure and table.
Vertical Horizon Local Management
|
| Management Configuration | |||
|
| Management VLAN | : ALL | ||
|
| VLAN |
| : 1 |
|
|
| <APPLY> | <OK> | <CANCEL> | |
| Use <TAB> or arrow keys to move, <Space> to scroll options. | ||||
|
|
| |||
| Figure | ||||
|
|
| |||
Parameter | Default | Description | |||
Management VLAN | All | Select ALL to give all VLANs access to switch | |||
|
|
| management, or ONE to restrict access to a | ||
|
|
| specified VLAN. If you select just one VLAN, you | ||
|
|
| must specify its VLAN ID on the following line. | ||
VLAN | 1 | Specifies the VLAN ID that has access to switch | |||
|
|
| management. |
26 |