g. Trigger Set-up
Trigger set-up sets the usage of the trigger output option. If e.g. an SDA2175 is connected to drive a subwoofer from the Line out, the trigger can be activated and used for controlling the power of the SDA2175.
h. Remote Control
Remote Control set-up makes it possible to activate or de-activate the remote control. This is useful in set-ups with more than one TDA 2200 amplifier in the room. The master amplifier then becomes the only one receiving signals from the remote, processes them and controls the rest of the TDA 2200’s over the Lyngdorf RS232 link.
i. Display
The sub menus accessible in the Display menu are:
•Display Timeout
•Display Brightness
Display timeout set-up is used for enabling/disabling the 10 sec. display fade-out feature. If enabled the Main Display reading will fade out after 10 sec of inactivity from the remote control or front panel buttons.
Display brightness is used to control the brightness of the display. The brightness can be set to 25%, 50%, 75% and 100%.