Lyngdorf Audio RP-1 owner manual

Page 11

16.Volume Up/down No function.

17.Up / Down / Left / Right

In normal operation mode the Up/Down toggles between Bypass, Focus and Global ﬁlter and the Left/ Right toggles between Neutral and the available voicings.

In menu mode they are used for navigation in the menu system. Pressing and holding down the Up/ Down, Right/Left keys, changes some selected values fast.

18. Enter

Turns the RP-1 On from stand-by mode and works as Enter in menu system.

19. No Function.

Image 11

Contents RP-1 RoomPerfect Page Table of Contents Serial Number Registration Operating VoltageUnpacking the RP-1 Introduction Remote control AccessoriesControls Front PanelRear Panel Display IndicatorsPage Remote Control Page Connecting to sources and ampliﬁers Connecting the RP-1Integrated amp / Preamp-poweramp RP-1 Setup options of Main and Line outputs Navigating the Menu System Menu SystemMenu Tree Voicing Introduction to RoomPerfectGlobal Listening Focus ListeningRoomPerfect Guided SetupSetting the Measurement Volume Level Room Measurements Focus MeasurementAdding more Room Measurements Calculation of Focus and Global Filters Measure Room Pos Advanced OptionsChange Focus Position RoomCorrection RoomKnowledgeDisplay Brightness Display TimeoutDisplay Input ConnectionComm Address Advanced SetupInput Sensitivity CommunicationRouting Line Out LevelFilter Type Crossover FrequencyRemote Control DelayFirmware Versions Factory ResetRoomPerfect TroubleshootingRP-1 Firmware Upgrading Balanced Inputs ConnectorsCleaning and Maintenance Mains ConnectorMains Technical SpeciﬁcationsAudio ProtectionTechnical Assistance Voicing Curves AppendixPage