Lyngdorf Audio RP-1 owner manual Navigating the Menu System

Page 15

Menu System

The Main Display on the front panel of the RP-1 shows all functionality and current status of the RP-1. An overview of the menu tree can be seen in the ‘Menu Tree’ chapter.

Navigating the Menu System

Pressing the Menu button on the front panel or the remote enters the menu or steps back one level in the menu system.

Use the left/right arrows keys to navigate the Menu system. To access a sub menu setting press the Enter button. To change a setting, use the Up/Down and/or Left/Right arrows and press Enter to accept the change, or Menu to exit without applying any changes.

Pressing and holding down the Up/Down, Right/Left keys, changes some selected values fast.

15

Image 15

Contents RP-1 RoomPerfect Page Table of Contents Operating Voltage Unpacking the RP-1Serial Number Registration Introduction Remote control AccessoriesControls Front PanelRear Panel Display IndicatorsPage Remote Control Page Connecting to sources and ampliﬁers Connecting the RP-1Integrated amp / Preamp-poweramp RP-1 Setup options of Main and Line outputs Navigating the Menu System Menu SystemMenu Tree Voicing Introduction to RoomPerfectGlobal Listening Focus ListeningRoomPerfect Guided SetupSetting the Measurement Volume Level Room Measurements Focus MeasurementAdding more Room Measurements Calculation of Focus and Global Filters Advanced Options Change Focus PositionMeasure Room Pos RoomCorrection RoomKnowledgeDisplay Brightness Display TimeoutDisplay Input ConnectionComm Address Advanced SetupInput Sensitivity CommunicationRouting Line Out LevelFilter Type Crossover FrequencyRemote Control DelayFirmware Versions Factory ResetRoomPerfect TroubleshootingRP-1 Firmware Upgrading Balanced Inputs ConnectorsCleaning and Maintenance Mains ConnectorMains Technical SpeciﬁcationsAudio ProtectionTechnical Assistance Voicing Curves AppendixPage