Dell B-FCX manual SFP interfaces, Optional two-port 10 Gbps XFP uplink module

1 Hardware features

SFP interfaces

Table 3 describes the network interfaces supported on PowerConnect B-FCX devices.

TABLE 3	SFP network interfaces
Interface		Show Media Description	Description
1000Base-BX-D		M-GBXD	1000Base-BXD SFP optic
			SMF, transmits at 1490nm
			and receives at 1310nm,
			LC connector, single strand
			SMF fiber. This optic
			should only be connected
			to an E1MG-BXU at the far
			end.
1000Base-BX-U		M-GBXU	1000Base-BX-U SFP optic
			SMF, transmits at 1310nm
			and receives at 1490nm,
			LC connector, single strand
			SMF fiber. This optic
			should only be connected
			to an E1MG-BXD at the far
			end.
1000Base-LHA		M-LHA	1000Base-LHA SFP optic,
			SMF, LC connector, Optical
			Monitoring Capable
1000Base-LX		M-LX	1000Base-LX SFP optic,
			SMF, LC connector, Optical
			Monitoring Capable
1000Base-SX		M-SX	1000Base-SX SFP optic,
			MMF, LC connector, Optical
			Monitoring Capable
100Base-FX		M-FX	100Base-FX SFP optic
			MMF 8 Pack, LC connector,
			Optical Monitoring Capable
100Base-FX-IR		M-FX_IR	100Base-FX-IR SFP optic
			for SMF with LC connector,
			Optical Monitoring
			Capable. For distances up
			to 15Km.
100Base-FX-LR		M-FX-LR	100Base-FX-LRSFP optic
			for SMF with LC connector,
			Optical Monitoring

Capable. For distances up to 40Km.

Optional two-port 10 Gbps XFP uplink module

The PowerConnect B-FCX624s and PowerConnect B-FCX648s devices include a slot on the front panel for a two-port 10 Gbps XFP uplink module. This module operates at 10 Gbps full duplex mode.

6	PowerConnect B-FCX Switch Hardware Installation Guide
	53-1002267-01