Dell B-FCX manual Cooling system and fans, Storage environment, Hardware specifications

Page 68

5 Hardware specifications

Storage environment

Table 23 provides the storage environment specifications.

TABLE 23 Storage environment specifications

Storage Temperature

Storage Humidity

Storage Altitude

 

 

 

40× to 70× C

95% maximum,

3,000 meter (10,000 feet)

(-40× to 158× F)

non-condensing

maximum

 

 

 

Cooling system and fans

The fans cool the CPU, main memory, and voltage regulators. For the PowerConnect B-FCX624s and PowerConnect B-FCX648s switches, the fans use either a push or pull configuration to move the air from the right side of the device to the left side of the device.

Total cooling capacity: 80 to 130 watts

Total air flow: 34.3 CFM

Operating noise: ideal 51 dB-A

For the PowerConnect B-FCX624E and PowerConnect B-FCX648E models, the air flows from the front to the back (FtB) of the device. For the PowerConnect B-FCX624I and PowerConnect B-FCX648I models, the air flows from the back to the front (BtF) of the device.

Total cooling capacity: 180 Watts

Total air flow: 85.2 CFM

Operating noise: ideal 60 dB-A

NOTE

Operating noise is based on the ISO 7779 standard.

Figure 39 shows the airflow for the PowerConnect B-FCX624s and PowerConnect B-FCX648s models. Figure 40 shows airflow for PowerConnect B-FCX624-E and PowerConnect B-FCX648-E devices and Figure 41 shows airflow for PowerConnect B-FCX624-I and PowerConnect B-FCX648-I devices.

CAUTION

For the PowerConnect B-FCX624E, PowerConnect B-FCX624I, PowerConnect B-FCX648E, and PowerConnect B-FCX648I devices, be sure that the airflow direction of the power supply unit matches that of the installed fan tray. The power supplies and fan trays are clearly labeled with either a green arrow with an “E”, or an orange arrow with an “I” as shown in Table 1 on page 3.

For an illustration of the fan tray labels, see “Power supply and fan tray labels for PowerConnect B-FCX624-E, PowerConnect B-FCX624-I, PowerConnect B-FCX648-E, and PowerConnect B-FCX648-I devices” on page 3.

58

PowerConnect B-FCX Switch Hardware Installation Guide

 

53-1002267-01

Image 68
Contents PowerConnect B-FCX Switch Page Contents Checking Network Devices and Testing Connectivity Managing the PowerConnect B-FCX HardwareChapter Troubleshooting PowerConnect B-FCX Switch Hardware Installation Guide Audience Supported hardware and softwareDocument conventions Text formattingRelated publications Command syntax conventionsCommand Parameters Getting technical help or reporting errors Contacting DellPowerConnect B-FCX Switch Hardware Installation Guide Hardware features Product OverviewPowerConnect B-FCX624s front panel Device Label on required power supply Control featuresHardware features Hardware features Out-of-band RJ45 management Interface PowerConnect B-FCX 10/100/1000 BASE-T portsSerial management interface DB9 Console port Out-of-band RJ45 management interfaceSlot designations Device SlotInterface Show Media Description SFP interfacesOptional two-port 10 Gbps XFP uplink module Optional Four-port 1 Gbps SFP and 10 Gbps SFP+ modules Optional 10Gbps XFP module is not hot-swappableFour-port 1 Gbps SFP module status LEDs Condition StatusFour-port 10 Gbps SFP+ module status LEDs Cable specifications for CX4 stacking ports16/10 Gbps Ethernet CX4 stacking ports Port status LEDs Hardware features System status LEDs Power status LEDsSwitch Status StateHardware features Port status LEDs SFP+Power supplies Switch Status RedundancyPower supply unit operation General requirements Package contentsUnpacking the device Installation tasks Installation precautionsFollow all precautions when installing a Dell device Task Where to Find More Information NumberGeneral precautions Lifting precautionsPower precautions Installation precautionsPreparing the installation site Installation locationPreparing the installation site Cabling infrastructureInstalling the device Desktop installationRack mount installation Connecting devices in a stack PowerConnect B-FCX624s and PowerConnect B-FCX648s devicesPowerConnect B-FCX Switch Hardware Installation Guide PowerConnect B-FCX624 and PowerConnect B-FCX648 devices Powering on the system Attaching a PC or terminal Installing and replacing a power supply unit Wiring map for serial cableSerial cable wiring As indicated in , some of the wires should not be connectedInstalling and replacing a power supply unit PowerConnect B-FCX Switch Hardware Installation Guide Page PowerConnect B-FCX Switch Hardware Installation Guide Page PowerConnect B-FCX Switch Hardware Installation Guide Checking Network Devices and Testing Connectivity Assigning permanent passwordsSetting passwords Recovering from a lost passwordAssigning permanent passwords Enter the following command to set the super user passwordDevices running Layer 2 software Configuring IP addressesSyntax enable password Devices running Layer 3 software Configuring IP addresses Assigning an IP address to an Ethernet portDeleting an IP address Syntax interface loopback numAssigning an IP address to a virtual routing interface Syntax router-interface ve num Syntax interface ve numConnecting network devices ConnectorsCable specifications Connecting to Ethernet or fast Ethernet hubsConnecting to workstations, servers, or routers Connecting a network device to a fiber portAutomatic MDI or Mdix detection Fiber Optic transceiversGigabit Optic Distance Supported for stacking Installing a transceiverAll fiber optic interfaces use Class 1 lasers Cabling a fiber optic transceiver Testing connectivity Cleaning the fiber optic connectorsTesting connectivity Pinging an IP addressMeaning or Action Testing connectivity Network connection-related LED statesDesired Meaning Troubleshooting network connections Tracing a routeUsing Virtual Cable Testing to diagnose a cable Configuration notesCommand syntax Viewing the results of the cable analysisDigital optical monitoring Syntax show cable-diag tdr port-numDefines the fields shown in this output Cable statistics This Line DisplaysTroubleshooting network connections Displaying the temperature Managing temperature settingsUsing the temperature sensor Displaying Syslog messages for temperature Changing temperature warning and shutdown levelsManaging temperature settings Syntax temperature warning stack-unit valueChanging the shutdown temperature Syntax fan-threshold speed-3 mp lowest value highest valueCommand Displaying PowerConnect B-FCX CPU usage Changing the temperature polling intervalRemoving MAC address entries Syntax chassis poll-time stack-idvalueHardware maintenance schedule Hardware maintenance scheduleReplacing a copper or fiber optic module Removing a copper or fiber optic moduleReplacing a copper or fiber optic module Cleaning the fiber optic connectorsCabling a fiber optic module Replacing a copper or fiber optic module Hardware specifications Physical dimensions and weightEnvironmental considerations Operating EnvironmentHardware specifications Storage Temperature Storage Humidity Storage AltitudeCooling system and fans Storage environmentAir Inflow Air outlet Mgmt Pinouts and signalling Serial Console port pinoutsMicrons MHz*km or Cable Type Connector TypeRange meters Hardware specifications Cable length summary Power cordsAC power supply specifications Hardware specifications Diagnosing switch indicators Power and cooling problemsInstallation Troubleshooting chartIn-band access Diagnosing switch indicatorsUSA FCC CFR 47 Part 15 Warning Industry Canada statementEurope and Australia Cispr 22 Class a Warning Japan VcciJapan power cord KoreaRussia Class a statementCertifications Regulatory complianceRegulatory compliance Regulatory compliance Vorsicht Devices near the input power connectors Never leave tools inside the chassis Gefahr Device PowerConnect B-FCX Switch Hardware Installation Guide