Carrier Access 3200 quick start Log

Page 20

Quick Start

Log in

Log in

After successful connection, via telnet or HyperTerm, the user must login. Default Logins are: Login: admin

Password: admin123

After successful login the prompt will be displayed as follows: Adit 3200>

NOTE: It is recommended that you change your password from the default.

20	Adit 3200 - Release 1.6

Image 20

Contents Adit Page Quick Start Guide Unpacking and Inspection Electrostatic Discharge ESD PrecautionsInstallation Environment User Safety InstallationCompliant Installation Wall Mounting Rack Mounting Optional Feature To rack mount the Adit 3000, follow the instructions belowTray Slide Adit 3104, 3200, 3300 and 3400 Battery Backup Back Chassis OverviewFront Interface Connectors Front of AditBack of Adit Grounding the UnitPower Battery ConnectionTo connect AC power To connect -48 VDC powerRS-232 Craft Port Female DB-9 Direction DescriptionState Description DS1/E1 Connection PortsPin Name Description Reset Button 10/100Base-TX EthernetAlarm/Status LEDs To access the management console Command DescriptionWeb-Based Management #show interface ethernet 2 Eth WANSetting up a CLI Connection Set the New-line/Transmit value CR+LFLog Key Enabled Software Features Adit 3200 show versionBasic Configuration Setup Adit 3200 for access via Web-BrowserRestore Factory Defaults Select Restore DefaultsModify Default Admin User Quick Start Configure Ethernet WAN Interface Web-browserSelect Apply to apply the new settings Configure Serial 1 as WAN Set Network to WAN