Carrier Access 3200 quick start Configure Serial 1 as WAN, Set Network to WAN

Page 28

Quick Start

Basic Configuration

Configure Serial 1 as WAN

In the web-browser:

1.Select Network Connections from the Navigation bar.

2.Select Serial 1.

3.Select Settings button.

4.Set Network to WAN.

5.Select Apply to apply the new settings.

28	Adit 3200 - Release 1.6

Image 28

Contents Adit Page Quick Start Guide Installation Environment Electrostatic Discharge ESD PrecautionsUnpacking and Inspection User Safety InstallationCompliant Installation Wall Mounting Rack Mounting Optional Feature To rack mount the Adit 3000, follow the instructions belowTray Slide Adit 3104, 3200, 3300 and 3400 Battery Backup Front Chassis OverviewBack Interface Connectors Front of AditBack of Adit Grounding the UnitPower Battery ConnectionTo connect AC power To connect -48 VDC powerRS-232 Craft Port Female DB-9 Direction DescriptionPin Name Description DS1/E1 Connection PortsState Description Reset Button 10/100Base-TX EthernetAlarm/Status LEDs To access the management console Command DescriptionWeb-Based Management #show interface ethernet 2 Eth WANSetting up a CLI Connection Set the New-line/Transmit value CR+LFLog Key Enabled Software Features Adit 3200 show versionBasic Configuration Setup Adit 3200 for access via Web-BrowserRestore Factory Defaults Select Restore DefaultsModify Default Admin User Quick Start Configure Ethernet WAN Interface Web-browserSelect Apply to apply the new settings Configure Serial 1 as WAN Set Network to WAN