Carrier Access 3200 quick start DS1/E1 Connection Ports, Pin Name Description, State Description

Quick Start

Interface Connectors

DS1/E1 Connection Ports 1 8

Each DS1/E1 connection port is equipped with a standard RJ-48C (female) on the Adit 3000 unit. Note: E1 will be available in a future release.

The pinouts are as follows:

DS1/E1 RJ-48C

The pinouts are as follows:

Note: This is a hub pinout, you will need a straight cable to connect to a PC.

Pin

1

2

3

4

5

6-8

Name	Description
Receive Ring	Receive from DS1 network
Receive Tip	Receive from DS1 network
N/C	Not connected
Transmit Ring	To DS1 network
Transmit Tip	To DS1 network
N/C	Not connected

The LEDs are as follows (left LED only):

State	Description
Off	Off line
Green	Normal
Red	Loss of Signal (LOS)
Yellow	Bipolar Violation (BPV)
Flashing Green	Loopback active
Flashing Yellow	Yellow Alarm (Remote Alarm Indication)
Flashing Red (Slow)	Loss of Frame (LOF) or Alarm Indication Signal (AIS)
Flashing Red (Fast)	Self-test Failure

Adit 3200 - Release 1.6 15