Castelle OfficeDirect Storage Server Storage Server Setup Using Windows, Software Installation

Page 11

STORAGE SERVER USER ’S GUIDE

be ON. Then, during the boot process, the Ready, Alert and Disk Full LEDs will be ON. Once the boot process is finished, the Ready LED should be ON and the Alert LED should be OFF. If the Alert LED stays ON, there is a hardware problem. Repeated beeps also indicate a failure to boot correctly.

NOTE: If the Storage Server is powered on and in Ready mode DO NOT pull the power adapter without first shutting down the Storage Server. Disconnecting power prior to shutdown causes a 15 to 20 minute check disk process. Please see page 30 for proper shutdown procedures.

STORAGE SERVER SETUP USING WINDOWS

For basic operation, only the following setup is required. For further Administrative options, see Chapter 3 - Administration.

Software Installation

1.Place the Storage Server setup CD-ROM in the drive of your Windows system. If setup does not start automatically, run SETUP.EXE in the root directory.

2.Follow the prompts to install the Storage Server Utility.

Using the Storage Server Utility

1.From the Start Menu, select Programs>OfficeDirect

Storage Server> Storage Server Utility

.

Storage Server Setup Utility

8

Image 11

Contents User’s Guide Plug-&-forget Network Storage SolutionCastelle North America Sales Castelle Corporate HeadquartersCastelle UK Headquarters Technical SupportCE Marking Warning Safety InformationFCC Statement Contents About your Storage Server Package Contents Storage Server FeaturesRear Panel What YOU’LL NeedConnections and Components Front Panel LEDs LEDsBuzzer SpecificationsRequirements Installation and SetupSetting UP the Hardware Using the Storage Server Utility Storage Server Setup Using WindowsSoftware Installation Comment Setup Screen DataServer Server NameAutomatically Enable Dhcp ServerObtain an IP AddressApple Networking Storage Server Setup Using MacintoshMicrosoft Networking HTTP//192.168.0.2 Connecting to the Storage ServerPrinter Setup for Macintosh Storage Server Setup with Faxpress FAX Servers Storage Server Setup with Officedirect Messaging SERVER.100Verview AdministrationRemember Connecting to the Storage ServerWeb Interface Windows UsersJavaScript Support Main Menu ConfigurationOther Users Status Storage Management GroupSystem UtilitiesShares Managing SHARES, GROUPS, and UsersTerminology GroupsShare name matches Drive Name Public share Spool folder AdminSpecial Shares, Groups & Users Shares & FoldersGuest Multiple Access RightsNested Shares Task Procedure Common Administrative TasksShutdown Backup data onConfigure ServerTCP/IP Setup Windows Client SetupAdd ProtocolMicrosoftTCP/IPOK Dhcp Client ConfigurationNetwork Logon Changing your Windows Logon Password ManagementUsing the Storage Servers Storage Do not delete these files Using the Storage Servers PrinterUsing the Storage Servers Storage Select AppleControl PanelTCP/IP Macintosh Client SetupAccessing Disk Storage Changing Your Password Using the Storage Servers PrinterStorage Server Utility doesnt list any Storage Servers TroubleshootingProblem RecommendationProblem Print job does not print. No error message is diplayed Storage Servers printer is not listed on my Mac Can’t connect to the Storage Server to configure itPrinter does not work at all, or does not work properly