USING THE STORAGE SERVER'S STORAGE
USING THE STORAGE SERVER'S STORAGE
To use the Storage Server's storage, you must "Map" a drive letter to each folder on the Storage Server folder which you wish to access. The "Drive" will then be available to all Windows programs. To enable the Storage Server’s storage:
1.
2.Locate the Storage Server, as shown below. If it is not listed,
3.
4.
.
5.Select a drive letter for this folder, and check the Reconnect at Logon checkbox. (If this is not done, the mapping will be lost when you shut down your PC.) Click OK.
WINDOWS CLIENT SETUP 29