Zhone Technologies Z-PLEX-10-24-DOC-SC manual Type FXS

Page 86

Parameter reference

Alphabetical Reference

•LPFD (Loop start-forward disconnect): Provides disconnect when FXS is connected to voice messaging system.

•GS (Ground start): Used with two-way PBX trunks.

•GSA (Ground start automatic): Used with equipment requiring fast response time to central office (CO).

•DPT

See Table A-2 on page A-14for a list of supported MODE and TYPE settings.

Configuration group: FXOCFG

TYPE (FXS)

The Type setting matches the signaling behavior of the FXS equipment to the remote switch. Possible values are:

•LS (Loop start): used with traditional telephone stations and simple PBX trunks.

•LSFD (Loop start-forward disconnect): Provides disconnect when FXS is connected to voice messaging system. Typically used when connecting to automated answering equipment.

•GS (Ground start): Used with two-way PBX trunks. This setting helps prevent glaring and call collisions.

•GSA (Ground start automatic): Used with equipment requiring fast response time to central office (CO).

•GSI (Ground start immediate): Used with equipment requiring fast response time to the station or PBX.

•SP (Single party): SLC-96 single party service.

•UVG (Universal voice grade): Toll quality voice for SLC-96.

•UVGA (Universal voice grade automatic): Used with some non-Bell switches for SLC-96.

Changing the Supervision type causes all FXS calls on the affected FXS line groups to be reset to the idle state each time a setting is changed. Any active calls in that FXS line group are dropped.

See Table A-2 on page A-14for a list of supported MODE and TYPE settings.

Configuration group: FXSCFG

Syntax: (GET/SET) FXSCFG:TYPE:n:(LS, LSFD, GS, GSA, GSI, SP, UVG, UVGA)

A-28 \ Zhone Technologies

Page 85 Page 87
Image 86
Page 85 Page 87
Contents Plex User’s Guide Trademarks Regulatory Information FCC Part 68 Regulatory InformationCountry-Specific Regulatory Compliance Information Industrie Canada RequirementsPage Page Contents Chapter Configuring the ZPlex Chapter DiagnosticsAppendix a Alphabetical Reference \ Zhone Technologies Product overview Introduction Product overviewBenefits FeaturesFeatures Introduction TR-08Introduction Managing the Z-Plex Managing the Z-PlexSnmp 2 CLI Product specificationsProduct specifications Introduction TftpIntroduction Product specifications AMI, B8ZSProduct specifications Introduction Back panel Installing the Z-Plex Product descriptionProduct description Packing materials Unpacking the productFront panel Kit of partsInstalling the product Important Safety InstructionsInstalling the product Installing the Z-Plex Installing the Z-Plex Rack mounting Rack mountingWall mounting Locating the product on a desktop Installing the Z-PlexLocating the product on a desktop Backpanel connectors Connector typeElectrical Installation Connector type DCE DB25 data port female connector Data port connector pinoutsData port connector pinouts Electrical Installation Pair female amphenol connector 1 FXO/FXS connectorsElectrical Installation Data port connector pinouts Power requirements Electrical Installation Power requirements2 RJ48 connector T1 connector pinoutsElectrical Installation Alarm AlarmPower installation AC power installationGrounding requirements Electrical Installation Grounding requirementsRecommended cables Electrical Installation CablingCabling Cabling Electrical Installation Using the command line interface Configuring the Z-Plex Using the command line interfaceQuick start system configuration Quick start system configuration Configuring the Z-PlexConfiguring the Z-Plex Quick start system configuration Logging in and out of the system Setting the dateConfiguring a management interface Configuring the Ethernet management channel Configuring the local management channelConfiguring the DS0 management channel Configuring the IP over FDL management channelConfiguring Snmp Configuring the Z-Plex Configuring SnmpConfiguring system contact information Configuring T1 interfaces Configuring the Z-Plex Configuring T1 interfacesConfiguring a T1 drop and insert interface Configuring FXS portsConfiguring FXO ports Configuring the Z-Plex Configuring FXO portsConfiguring the V.35 data port Configuring the V.35 data port Configuring the Z-PlexAdding and deleting network routes Configuring the Z-Plex Adding and deleting routesAdding and deleting routes Adding and deleting host routes Example routing configurationAdding and deleting routes Configuring the Z-Plex Example routing configuration Displaying routesRoute Display Values Displaying host routesConfiguring the Z-Plex System maintenance commands System maintenance commandsRebooting the system Displaying flash informationSystem maintenance commands Configuring the Z-Plex Displaying list of alarmsDisplaying and clearing list of history alarms Displaying timeslot usageActivating code in bank Tftp downloading18 \ Zhone Technologies Diagnostics T1 loopbacks T1 loopbacksT1 loopbacks Diagnostics T1 loopbacksActivating a BER test for an entire T1 line BER testingDiagnostics BER testing Activating a BER test for individual time slotsData port loopbacks Diagnostics Data port loopbacksTesting FXO and FXS ports Diagnostics Testing FXO and FXS portsTesting FXO and FXS ports Diagnostics FXO and FXS ports loopbackConfiguring FXO loopbacks Configuring FXS loopbacksUsing test mode on the FXO and FXS ports Setting or viewing the transmit Abcd signaling bitsDiagnostics LED indicators LED indicatorsAlarm LED Ethernet LED Power LEDLED indicators Diagnostics WAN LEDsParameter reference Configuration groupsTable A-1. Configuration groups in the Z-Plex Alphabetical Reference Parameter referenceParameter reference Alphabetical Reference Fxotst Alphabetic reference Allfartot AllcurAllfarcur AllfarintCLK BertBES Code CtsdelayClksrc CTSCUR DS0FDL DSRErrins Hdlc FdlipFrame Iphdl INTIpfdl Loop FXO LinelenLofc Loopback T1 Loop FXSLoopback Maskfdl Mode FXOMask MaskhdlMode FXS Rate NchanPattern Rtlp FXO RlsdRngbk RxAB FXS Rtlp FXSRxAB FXO Slip SchanSES StateState T1 State FXOState FXS Syslocation SyscontactSysdescr SysnameTrcntl FXO Test FXSTOT Trnkc FXS Trcntrl FXSTrnkc FXO TS data port Trstat FXOTrstat FXS TS FXO TS FXSTtlp FXO TsbertoffTsberton Ttlp FXSType FXO TxAB FXOTxAB FXS Type FXS WAN TypeUAS WAN FXOCommand reference Queryhalarm Error messagesAlphabetical Reference Error messages RebootError messages Alphabetical Reference CLI reference Basic control commandsTable A-4. Basic control commands Alphabetical Reference CLI referenceMovement and search commands CLI reference Alphabetical ReferenceTable A-6. Insert and change commands Insert and change commandsTable A-5. Movement and search commands Table A-7. Delete commands Delete commandsPut and undo commands Table A-8. Put and undo commandsUndo last command 38 \ Zhone Technologies Index LED 194-4 Index-4 / Zhone Technologies WAN LED

Z-PLEX-10-24-DOC-SC specifications

Zhone Technologies is a leading provider of innovative telecommunications and data networking solutions, and the Z-PLEX-10-24-DOC-SC is one of their advanced products designed to meet the demands of modern networking environments. This versatile optical networking solution is ideal for service providers looking to deliver high-speed broadband services to residential and business customers.

The Z-PLEX-10-24-DOC-SC provides an impressive 24-port capability, making it a robust choice for deployment in various settings, from small community networks to larger metropolitan areas. Its compact design allows for easy integration into existing systems, minimizing the need for extensive reconfiguration or additional space. The system is geared towards enabling efficient fiber deployment and helps operators enhance their service offerings while reducing operational expenses.

One of the main features of the Z-PLEX-10-24-DOC-SC is its support for Dense Wavelength Division Multiplexing (DWDM) technology. This allows multiple optical signals to be transmitted simultaneously over a single optical fiber, greatly increasing the capacity and efficiency of the network. By leveraging DWDM, service providers can maximize their existing infrastructure without the need for extensive new fiber installation.

Another significant characteristic of the Z-PLEX-10-24-DOC-SC is its scalability. The system is designed to grow with the telecommunication needs of operators, supporting various service types, including voice, video, and data, without sacrificing performance or quality. This flexibility ensures that as users' demands evolve, the Z-PLEX-10-24-DOC-SC can adapt to meet these changing requirements.

The unit also incorporates advanced management features, supported by Zhone's innovative software tools. These tools facilitate network monitoring, configuration, and maintenance, allowing operators to optimize their operations and provide better service to their end-users. This end-to-end management capability is essential in today’s fast-paced digital landscape, where customer satisfaction is paramount.

In summary, the Zhone Technologies Z-PLEX-10-24-DOC-SC is a powerful optical networking solution that combines advanced technology with scalability and efficiency. It empowers service providers to deliver high-quality broadband services while optimizing their resources. With its DWDM support, compact design, and robust management tools, the Z-PLEX-10-24-DOC-SC stands out as a reliable choice for modern telecommunications infrastructure.
Top Page Image Contents