Avocent KVM over IP switch user manual Local console

Page 14

8/16 PS/2 KVM over IP switch

Step 3 (Local console)

Connect the monitor to the KVM Switch. Using the attached cable, or the one included with your monitor, connect it to the HDDB15-pin female port on the back of the KVM unit labeled with the monitor symbol at the CONSOLE connector.

Step 4

Connect the keyboard to the KVM Switch. If you have an AT type keyboard, you will need an AT to PS/2 adapter.

Step 5

Connect the mouse to the KVM Switch.

Step 6

Each PC port connector is HDDB15-pin type. Locate your input cable. It will have an HDDB15-pin male connector at one end. Plug it into any label computer port on the rear of KVM switch unit. The other end of input cable will have three connectors: a HDDB15-pin male type for PC video, a Mini Din 6 pin female type for keyboard and a Mini Din 6 pin female type for mouse. To plug these three connectors into the respective ports of computer. Repeat the same procedure to all of PCs.

11

Image 14

Contents USER’S Manual RevTable of Contents Menu Options Initial IP configuration Quick Installation GuideInstallation Video modesWeb interface Remote Console16 PS/2 KVM over IP switch Introduction When the server is up and runningWhen the sever is dead Features Package contents Model No port PS/2 IP-KVM switch Technical specifications Model No Port PS/2 IP-KVM switchCable diagrams PS/2 Cable System requirement Model No Ports PS/2 IP-KVM switchModel No Ports PS/2 IP-KVM switch VGA CablePS/2 to DB9 adapter Optional Operation Overview Hardware installationConnecting PS/2 IP-KVM switch to the host system StepLocal console Internet Connecting the External Reset/Power Option Initial configuration via Dhcp server ConfigurationInitial Configuration PS/2 IP-KVM switch Setup ToolAuthentication IP-KVM switch setup toolKeyboard, Mouse and Video configuration Initial configuration via serial consoleIP autoconfiguration IP addressHost system mouse settings 3.1 PS/2 IP-KVM switch keyboard settingsRemote Mouse Settings Auto mouse speed and mouse synchronizationRecommended Mouse Settings Windows XP Mouse SettingsSingle and Double Mouse Mode Special Mouse DriverTelnet UsagePrerequisites ¾ The Membrane Buttons Port PS/2 IP-KVM Switch PC port LED Indication¾ 7-Segment Bank LED Indication ¾ Reset Button Bank Bank button and PC 8/16 8/16 buttonKeyboard Hot Key Commands To select PC port To get out of Auto Scan Mode, Press any key or Space barDaisy Chain Connection Hot PlugOn Screen Display Operation 16 PS/2 KVM over IP switch Login into the PS/2 IP-KVM switch and logout Login screenNavigation MainLogout from the PS/2 IP-KVM switch Remote Console General descriptionMain Window Remote Console Control BarExclusive Access Monitor OnlyScaling Mouse HandlingVideo Settings Local CursorReset all Modes PhaseReset this Mode BrightnessSoft Keyboard Save changesUndo Changes Remote Console Status Line 14. Remote Console Confirmation DialogRemote Control KVM Console Menu Options16 PS/2 KVM over IP switch Change Password Users And GroupsKVM Settings User Console15. User Console Settings Part 16 PS/2 KVM over IP switch 17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings Video4Device Settings Network16 PS/2 KVM over IP switch Dynamic DNS 20. Dynamic DNS16 PS/2 KVM over IP switch Security 22. Device Security23. Certificate Settings Certificate24. SSL Certificate Upload Serial Port 25. Serial Port16 PS/2 KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event Log16 PS/2 KVM over IP switch Device Information Board SummaryReset Functions 32. Event Log ListUpdate Firmware 33. Update FirmwareUnit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes