Avocent KVM over IP switch user manual Brightness, Contrast, Clock, Phase, Horizontal Position

Page 36

8/16 PS/2 KVM over IP switch

(depending on the quality of the video input signal). All in all the default setting should be suitable for most situations.

Video Settings through the remote console

Figure 5-11. Video Settings Panel

Brightness

Controls the brightness of the picture

Contrast

Controls the contrast of the picture

Clock

Defines the horizontal frequency for a video line and depends on the video mode. Different video card types may require different values here. The default settings in conjuction with the auto adjustment procedure should be adequate for all common configurations. If the picture quality is still bad after auto adjustment you may try to change this setting together with the sampling phase to achieve a better quality.

Phase

Defines the phase for video sampling, used to control the display quality together with the setting for sampling clock.

Horizontal Position

Use the left and right buttons to move the picture in horizontal direction while this option is selected.

Vertical Position

Use the left and right buttons to move the picture in vertical direction while this option is selected.

Reset this Mode

Reset mode specific settings to the factory-made defaults.

Reset all Modes

Reset all settings to the factory-made defaults.

33

Image 36

Contents USER’S Manual RevTable of Contents Menu Options Quick Installation Guide InstallationInitial IP configuration Video modesWeb interface Remote Console16 PS/2 KVM over IP switch When the server is up and running When the sever is deadIntroduction Features Package contents Model No port PS/2 IP-KVM switch Technical specifications Model No Port PS/2 IP-KVM switchSystem requirement Model No Ports PS/2 IP-KVM switch Model No Ports PS/2 IP-KVM switchCable diagrams PS/2 Cable VGA CablePS/2 to DB9 adapter Optional Hardware installation Connecting PS/2 IP-KVM switch to the host systemOperation Overview StepLocal console Internet Connecting the External Reset/Power Option Configuration Initial ConfigurationInitial configuration via Dhcp server PS/2 IP-KVM switch Setup ToolAuthentication IP-KVM switch setup toolInitial configuration via serial console IP autoconfigurationKeyboard, Mouse and Video configuration IP address3.1 PS/2 IP-KVM switch keyboard settings Remote Mouse SettingsHost system mouse settings Auto mouse speed and mouse synchronizationWindows XP Mouse Settings Single and Double Mouse ModeRecommended Mouse Settings Special Mouse DriverUsage PrerequisitesTelnet ¾ The Membrane Buttons Port PS/2 IP-KVM Switch PC port LED Indication¾ Reset Button Bank Bank button and PC 8/16 8/16 button Keyboard Hot Key Commands¾ 7-Segment Bank LED Indication To select PC port To get out of Auto Scan Mode, Press any key or Space barDaisy Chain Connection Hot PlugOn Screen Display Operation 16 PS/2 KVM over IP switch Login into the PS/2 IP-KVM switch and logout Login screenNavigation MainLogout from the PS/2 IP-KVM switch Remote Console General descriptionMain Window Remote Console Control Bar Exclusive Access Monitor OnlyScaling Mouse HandlingVideo Settings Local CursorPhase Reset this ModeReset all Modes BrightnessSave changes Undo ChangesSoft Keyboard Remote Console Status Line 14. Remote Console Confirmation DialogRemote Control KVM Console Menu Options16 PS/2 KVM over IP switch Change Password Users And GroupsKVM Settings User Console15. User Console Settings Part 16 PS/2 KVM over IP switch 17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings Video4Device Settings Network16 PS/2 KVM over IP switch Dynamic DNS 20. Dynamic DNS16 PS/2 KVM over IP switch Security 22. Device Security23. Certificate Settings Certificate24. SSL Certificate Upload Serial Port 25. Serial Port16 PS/2 KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event Log16 PS/2 KVM over IP switch Device Information Board SummaryReset Functions 32. Event Log ListUpdate Firmware 33. Update FirmwareUnit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes