Avocent KVM over IP switch user manual SSL Certificate Upload

Page 53

8/16 PS/2 KVM over IP switch

Figure 6-24. SSL Certificate Upload

After completing these three steps, the PS/2 IP-KVM switch has its own certificate that is used for identifying the card to its clients.

Warning

If you destroy the CSR on the PS/2 IP-KVM switch there is no way to get it back! In case you deleted it by mistake, you have to repeat the three steps as described above.

Common name

This is the network name of the PS/2 IP-KVM switch once it is installed in the user's network (usually the fully qualified domain name). It is identical to the name that is used to access the PS/2 IP-KVM switch with a web browser (without the “http://” prefix). In case the name given here and the actual network name differ, the browser will pop up a security warning when the PS/2 IP-KVM switch is accessed using HTTPS.

Organizational unit

This field is used for specifying to which department within an organization the PS/2 IP-KVM switch belongs.

Organization

The name of the organization to which the PS/2 IP-KVM switch belongs.

Locality/City

The city where the organization is located.

50

Image 53

Contents Rev USER’S ManualTable of Contents Menu Options Installation Quick Installation GuideInitial IP configuration Video modesRemote Console Web interface16 PS/2 KVM over IP switch Introduction When the server is up and runningWhen the sever is dead Features Package contents Model No port PS/2 IP-KVM switch Port PS/2 IP-KVM switch Technical specifications Model NoModel No Ports PS/2 IP-KVM switch System requirement Model No Ports PS/2 IP-KVM switchCable diagrams PS/2 Cable VGA CablePS/2 to DB9 adapter Optional Connecting PS/2 IP-KVM switch to the host system Hardware installationOperation Overview StepLocal console Internet Connecting the External Reset/Power Option Initial Configuration ConfigurationInitial configuration via Dhcp server PS/2 IP-KVM switch Setup ToolIP-KVM switch setup tool AuthenticationIP autoconfiguration Initial configuration via serial consoleKeyboard, Mouse and Video configuration IP addressRemote Mouse Settings 3.1 PS/2 IP-KVM switch keyboard settingsHost system mouse settings Auto mouse speed and mouse synchronizationSingle and Double Mouse Mode Windows XP Mouse SettingsRecommended Mouse Settings Special Mouse DriverTelnet UsagePrerequisites PC port LED Indication ¾ The Membrane Buttons Port PS/2 IP-KVM Switch¾ 7-Segment Bank LED Indication ¾ Reset Button Bank Bank button and PC 8/16 8/16 buttonKeyboard Hot Key Commands To get out of Auto Scan Mode, Press any key or Space bar To select PC portHot Plug Daisy Chain ConnectionOn Screen Display Operation 16 PS/2 KVM over IP switch Login screen Login into the PS/2 IP-KVM switch and logoutMain NavigationRemote Console General description Logout from the PS/2 IP-KVM switchRemote Console Control Bar Main WindowMonitor Only Exclusive AccessMouse Handling ScalingLocal Cursor Video SettingsReset this Mode PhaseReset all Modes BrightnessSoft Keyboard Save changesUndo Changes 14. Remote Console Confirmation Dialog Remote Console Status LineMenu Options Remote Control KVM Console16 PS/2 KVM over IP switch Users And Groups Change PasswordUser Console KVM Settings15. User Console Settings Part 16 PS/2 KVM over IP switch Keyboard/Mouse 17. Keyboard and Mouse SettingsVideo 18. Video SettingsNetwork 4Device Settings16 PS/2 KVM over IP switch 20. Dynamic DNS Dynamic DNS16 PS/2 KVM over IP switch 22. Device Security SecurityCertificate 23. Certificate Settings24. SSL Certificate Upload 25. Serial Port Serial Port16 PS/2 KVM over IP switch 27. Date and Time Date And Time29. Event Log Event Log16 PS/2 KVM over IP switch Board Summary Device Information32. Event Log List Reset Functions33. Update Firmware Update Firmware34. Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes