Avocent user manual 16 PS/2 KVM over IP switch

Page 48

8/16 PS/2 KVM over IP switch

IP auto configuration

With this option you can control if the PS/2 IP-KVM switch should fetch its network settings from a DHCP or BOOTP server. For DHCP, select “dhcp” , and for BOOTP select “bootp” accordingly. If you choose“none” then IP auto configuration is disabled.

IP address

IP address in the usual dot notation.

Subnet Mask

The net mask of the local network.

Gateway IP address

In case the PS/2 IP-KVM switch should be accessible from networks other than the local one, this IP address must be set to the local network router's IP address.

Primary DNS Server IP Address

IP address of the primary Domain Name Server in dot notation. This option may be left empty, however the PS/2 IP-KVM switch will not be able to perform name resolution.

Secondary DNS Server IP Address

IP address of the secondary Domain Name Server in dot notation. It will be used in case the Primary DNS Server cannot be contacted.

Remote Console And HTTPS port

Port number at which the PS/2 IP-KVM switch's Remote Console server and HTTPS server are listening. If left empty the default value will be used.

HTTP port

Port number at which the PS/2 IP-KVM switch's HTTP server is listening. If left empty the default value will be used.

Telnet port

Port number at which the PS/2 IP-KVM switch's Telnet server is listening. If left empty the default value will be used.

Bandwidth limitation

The maximum network traffic generated through the PS/2 IP-KVM switch ethernet device. Value in Kbit/s.

Enable Telnet access

Set this option to allow accessing the LARA express using the Telnet Gateway see the Section called Telnet Console ).

Disable Setup Protocol

Enable this option to exclude the PS/2 IP-KVM switch from the setup protocol.

45

Image 48

Contents USER’S Manual RevTable of Contents Menu Options Quick Installation Guide InstallationInitial IP configuration Video modesWeb interface Remote Console16 PS/2 KVM over IP switch When the server is up and running When the sever is deadIntroduction Features Package contents Model No port PS/2 IP-KVM switch Technical specifications Model No Port PS/2 IP-KVM switchSystem requirement Model No Ports PS/2 IP-KVM switch Model No Ports PS/2 IP-KVM switchCable diagrams PS/2 Cable VGA CablePS/2 to DB9 adapter Optional Hardware installation Connecting PS/2 IP-KVM switch to the host systemOperation Overview StepLocal console Internet Connecting the External Reset/Power Option Configuration Initial ConfigurationInitial configuration via Dhcp server PS/2 IP-KVM switch Setup ToolAuthentication IP-KVM switch setup toolInitial configuration via serial console IP autoconfigurationKeyboard, Mouse and Video configuration IP address3.1 PS/2 IP-KVM switch keyboard settings Remote Mouse SettingsHost system mouse settings Auto mouse speed and mouse synchronizationWindows XP Mouse Settings Single and Double Mouse ModeRecommended Mouse Settings Special Mouse DriverUsage PrerequisitesTelnet ¾ The Membrane Buttons Port PS/2 IP-KVM Switch PC port LED Indication¾ Reset Button Bank Bank button and PC 8/16 8/16 button Keyboard Hot Key Commands¾ 7-Segment Bank LED Indication To select PC port To get out of Auto Scan Mode, Press any key or Space barDaisy Chain Connection Hot PlugOn Screen Display Operation 16 PS/2 KVM over IP switch Login into the PS/2 IP-KVM switch and logout Login screenNavigation MainLogout from the PS/2 IP-KVM switch Remote Console General descriptionMain Window Remote Console Control BarExclusive Access Monitor OnlyScaling Mouse HandlingVideo Settings Local CursorPhase Reset this ModeReset all Modes BrightnessSave changes Undo ChangesSoft Keyboard Remote Console Status Line 14. Remote Console Confirmation DialogRemote Control KVM Console Menu Options16 PS/2 KVM over IP switch Change Password Users And GroupsKVM Settings User Console15. User Console Settings Part 16 PS/2 KVM over IP switch 17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings Video4Device Settings Network16 PS/2 KVM over IP switch Dynamic DNS 20. Dynamic DNS16 PS/2 KVM over IP switch Security 22. Device Security23. Certificate Settings Certificate24. SSL Certificate Upload Serial Port 25. Serial Port16 PS/2 KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event Log16 PS/2 KVM over IP switch Device Information Board SummaryReset Functions 32. Event Log ListUpdate Firmware 33. Update FirmwareUnit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes