Avocent KVM over IP switch user manual Authentication, IP-KVM switch setup tool

Page 18

8/16 PS/2 KVM over IP switch

Figure4-1. IP-KVM switch setup tool

On the upper left corner, the MAC address of the IP-KVM switch is displayed. To detect the MAC address, manually, press the button “Refresh Devices”. The displayed MAC address is the same MAC address printed on the white sticker placed on the back of the IP-KVM switch. If the IP-KVM switch is connected via USB, it is classified as an USB device and an appropriate drive letter is chosen for this device.

On the lower right corner of the window, there are two buttons: “Query Device” and “Setup Device”. Press the “Query Device” button to display the preconfigured values of the network configuration. The values are displayed in the text fields located above. If necessary, adjust the network settings to your needs. To save the changes enter an user name and an according password. Then press the “ Setup Device “ button.

Authentication

To adjust the authentication settings, enter your login as a super user, and change your password.

Super user login

Enter the login name of the super user. The initial value is “ super ”. All of characters are lower case.

Super user password

Enter the current password for the super user. This initial value is “ pass “. All of characters are lower case.

New super user password

Enter the new password for the super user.

New password (confirm)

Re-type the new password for the super user.

To close the window and accept the changes, press the “ OK ” button, otherwise press the “ Cancel ” button.

15

Image 18

Contents USER’S Manual RevTable of Contents Menu Options Initial IP configuration Quick Installation GuideInstallation Video modesWeb interface Remote Console16 PS/2 KVM over IP switch When the server is up and running When the sever is deadIntroduction Features Package contents Model No port PS/2 IP-KVM switch Technical specifications Model No Port PS/2 IP-KVM switchCable diagrams PS/2 Cable System requirement Model No Ports PS/2 IP-KVM switchModel No Ports PS/2 IP-KVM switch VGA CablePS/2 to DB9 adapter Optional Operation Overview Hardware installationConnecting PS/2 IP-KVM switch to the host system StepLocal console Internet Connecting the External Reset/Power Option Initial configuration via Dhcp server ConfigurationInitial Configuration PS/2 IP-KVM switch Setup ToolAuthentication IP-KVM switch setup toolKeyboard, Mouse and Video configuration Initial configuration via serial consoleIP autoconfiguration IP addressHost system mouse settings 3.1 PS/2 IP-KVM switch keyboard settingsRemote Mouse Settings Auto mouse speed and mouse synchronizationRecommended Mouse Settings Windows XP Mouse SettingsSingle and Double Mouse Mode Special Mouse DriverUsage PrerequisitesTelnet ¾ The Membrane Buttons Port PS/2 IP-KVM Switch PC port LED Indication¾ Reset Button Bank Bank button and PC 8/16 8/16 button Keyboard Hot Key Commands¾ 7-Segment Bank LED Indication To select PC port To get out of Auto Scan Mode, Press any key or Space barDaisy Chain Connection Hot PlugOn Screen Display Operation 16 PS/2 KVM over IP switch Login into the PS/2 IP-KVM switch and logout Login screenNavigation MainLogout from the PS/2 IP-KVM switch Remote Console General descriptionMain Window Remote Console Control BarExclusive Access Monitor OnlyScaling Mouse HandlingVideo Settings Local CursorReset all Modes PhaseReset this Mode BrightnessSave changes Undo ChangesSoft Keyboard Remote Console Status Line 14. Remote Console Confirmation DialogRemote Control KVM Console Menu Options16 PS/2 KVM over IP switch Change Password Users And GroupsKVM Settings User Console15. User Console Settings Part 16 PS/2 KVM over IP switch 17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings Video4Device Settings Network16 PS/2 KVM over IP switch Dynamic DNS 20. Dynamic DNS16 PS/2 KVM over IP switch Security 22. Device Security23. Certificate Settings Certificate24. SSL Certificate Upload Serial Port 25. Serial Port16 PS/2 KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event Log16 PS/2 KVM over IP switch Device Information Board SummaryReset Functions 32. Event Log ListUpdate Firmware 33. Update FirmwareUnit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes