Avocent KVM over IP switch user manual Features

Page 8

	8/16 PS/2 KVM over IP switch

Type of failure	Detected by
Hard disk failure	Console screen, CMOS set-up information
Power cable detached, power	Server remains in power off state after power on
supply failure	command has been given.
CPU Controller, main board failure.	Power supply is on, but there is no video output.
CPU fan failure	By server specific management software
RAM failure	Boot-Sequence on boot console

Table 2.1:Host system failures and how they are detected.

2.3 Features

z8/16 port KVM over IP switch is 19” rack mount size design.

zSupport DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux

zSupport iMAC, Power MAC and Sun Microsystems with USB port (Need work with USB-PS/2 adapter)

zHot Plug - Add PCs or Remove Connected PCs for Maintenance without Powering Down the KVM switch or PCs.

zHigh Video Quality – Resolution Up To 1920X1440 (local side), 1280 X1024 (remote side)

zNo Software Required - easy PC selection via On Screen Display Menu (OSD), Push Buttons, Hot Keys

zAt local console side - Support eight characters password protection and search PC server name

zAt Remove console side – Use SSL protocol for any encrypted network traffic between itself and a connected client.

zKeyboard status restored when switching PCs

zLED Display for easy status monitoring

zBuzzer sound for switching port confirmation.

zBuilt-in one extra daisy chain port and no waste any PC port

zNo DIP switch setting needed and auto detect daisy chain bank

zManage serves around the world

zKVM (keyboard, video, mouse) access over IP and analogous telephone line.

zBIOS level access

zNo impact on server or network performance

zAutomatically senses video resolution for best possible screen capture

zHigh-performance mouse tracking and synchronization

5

Image 8

Contents USER’S Manual RevTable of Contents Menu Options Quick Installation Guide InstallationInitial IP configuration Video modesWeb interface Remote Console16 PS/2 KVM over IP switch Introduction When the server is up and runningWhen the sever is dead Features Package contents Model No port PS/2 IP-KVM switch Technical specifications Model No Port PS/2 IP-KVM switchSystem requirement Model No Ports PS/2 IP-KVM switch Model No Ports PS/2 IP-KVM switchCable diagrams PS/2 Cable VGA CablePS/2 to DB9 adapter Optional Hardware installation Connecting PS/2 IP-KVM switch to the host systemOperation Overview StepLocal console Internet Connecting the External Reset/Power Option Configuration Initial ConfigurationInitial configuration via Dhcp server PS/2 IP-KVM switch Setup ToolAuthentication IP-KVM switch setup toolInitial configuration via serial console IP autoconfigurationKeyboard, Mouse and Video configuration IP address3.1 PS/2 IP-KVM switch keyboard settings Remote Mouse SettingsHost system mouse settings Auto mouse speed and mouse synchronizationWindows XP Mouse Settings Single and Double Mouse ModeRecommended Mouse Settings Special Mouse DriverTelnet UsagePrerequisites ¾ The Membrane Buttons Port PS/2 IP-KVM Switch PC port LED Indication¾ 7-Segment Bank LED Indication ¾ Reset Button Bank Bank button and PC 8/16 8/16 buttonKeyboard Hot Key Commands To select PC port To get out of Auto Scan Mode, Press any key or Space barDaisy Chain Connection Hot PlugOn Screen Display Operation 16 PS/2 KVM over IP switch Login into the PS/2 IP-KVM switch and logout Login screenNavigation MainLogout from the PS/2 IP-KVM switch Remote Console General descriptionMain Window Remote Console Control BarExclusive Access Monitor OnlyScaling Mouse HandlingVideo Settings Local CursorPhase Reset this ModeReset all Modes BrightnessSoft Keyboard Save changesUndo Changes Remote Console Status Line 14. Remote Console Confirmation DialogRemote Control KVM Console Menu Options16 PS/2 KVM over IP switch Change Password Users And GroupsKVM Settings User Console15. User Console Settings Part 16 PS/2 KVM over IP switch 17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings Video4Device Settings Network16 PS/2 KVM over IP switch Dynamic DNS 20. Dynamic DNS16 PS/2 KVM over IP switch Security 22. Device Security23. Certificate Settings Certificate24. SSL Certificate Upload Serial Port 25. Serial Port16 PS/2 KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event Log16 PS/2 KVM over IP switch Device Information Board SummaryReset Functions 32. Event Log ListUpdate Firmware 33. Update FirmwareUnit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS/2 KVM over IP Key Codes Table B.1 Key Names Video Modes